The John Deere 5615 tractor hydraulic pump flow is 22.5 GPM, and hydraulic system pressure is 2,800 psi.
Hydraulic pump flow22.5 GPM
Implement flow12.4 GPM
Total hydraulic flow12.4 GPM
Hydraulic pressure2,800 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity10 gal
John Deere 5615 Hydraulic Flow Details
Hydraulic pump flow
22.5 GPM
Implement hydraulic flow
12.4 GPM
Total hydraulic flow
12.4 GPM
Hydraulic system pressure
2,800 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
10 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
22.5 GPM
Average
22 GPM
Low
5.3 GPM
High
59 GPM
Implement hydraulic flow comparison
This model
12.4 GPM
Average
21.7 GPM
Low
5.3 GPM
High
43 GPM
Total hydraulic flow comparison
This model
12.4 GPM
Average
21.9 GPM
Low
4 GPM
High
60 GPM
Hydraulic pressure comparison
This model
2,800 psi
Average
2,726.4 psi
Low
435 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
10 gal
Average
14.9 gal
Low
2.8 gal
High
43.7 gal
John Deere 5615 Extra Hydraulic Notes
Hydraulic flow note
For hydraulic work, the key number on the John Deere 5615 is 12.4 GPM implement flow; that points toward normal loader use, small hydraulic implements and general utility work.
Hydraulic pressure note
At 2,800 psi, the John Deere 5615’s hydraulic system pressure matters most for lift force, cylinder force and loader response.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (12.4 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
System type matters on the John Deere 5615: closed-center affects how hydraulic flow and pressure are delivered to valves and implements.
Hydraulic fluid capacity note
The John Deere 5615’s hydraulic fluid capacity is listed as 10 gal; check the operator manual before servicing because capacity can change with transmission, hydraulic options and market.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
