The John Deere 5039D tractor hydraulic pump flow is 8 GPM, and hydraulic system pressure is 2,828 psi.
Hydraulic pump flow8 GPM
Implement flow18.4 GPM
Total hydraulic flow17.4 GPM
Hydraulic pressure2,828 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity9.5 gal
John Deere 5039D Hydraulic Flow Details
Hydraulic pump flow
8 GPM
Implement hydraulic flow
18.4 GPM
Total hydraulic flow
17.4 GPM
Hydraulic system pressure
2,828 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
9.5 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
8 GPM
Average
22 GPM
Low
5.3 GPM
High
59 GPM
Implement hydraulic flow comparison
This model
18.4 GPM
Average
21.7 GPM
Low
5.3 GPM
High
43 GPM
Total hydraulic flow comparison
This model
17.4 GPM
Average
21.9 GPM
Low
4 GPM
High
60 GPM
Hydraulic pressure comparison
This model
2,828 psi
Average
2,726.4 psi
Low
435 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
9.5 gal
Average
14.9 gal
Low
2.8 gal
High
43.7 gal
John Deere 5039D Extra Hydraulic Notes
Hydraulic flow note
With about 18.4 GPM implement flow, the John Deere 5039D sits in the utility tractor hydraulic range and is best suited to larger loaders, rear remotes and more demanding implements, depending on pressure and valve setup.
Hydraulic pressure note
The John Deere 5039D’s hydraulic pressure is listed at 2,828 psi, which is strong tractor hydraulic pressure; flow still decides attachment speed while pressure affects force.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (18.4 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 5039D’s hydraulic system type is open-center, which is simple and common on many compact and utility tractors.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 5039D is 9.5 gal, but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
