The John Deere 4960 tractor hydraulic pump flow is 30.6 GPM, and hydraulic system pressure is 2,530 psi.
Hydraulic pump flow30.6 GPM
Implement flow35.2 GPM
Total hydraulic flow29.5 GPM
Hydraulic pressure2,530 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity19.8 gal
John Deere 4960 Hydraulic Flow Details
Hydraulic pump flow
30.6 GPM
Implement hydraulic flow
35.2 GPM
Total hydraulic flow
29.5 GPM
Hydraulic system pressure
2,530 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
19.8 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
30.6 GPM
Average
22 GPM
Low
5.3 GPM
High
59 GPM
Implement hydraulic flow comparison
This model
35.2 GPM
Average
21.7 GPM
Low
5.3 GPM
High
43 GPM
Total hydraulic flow comparison
This model
29.5 GPM
Average
21.9 GPM
Low
4 GPM
High
60 GPM
Hydraulic pressure comparison
This model
2,530 psi
Average
2,726.4 psi
Low
435 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
19.8 gal
Average
14.9 gal
Low
2.8 gal
High
43.7 gal
John Deere 4960 Extra Hydraulic Notes
Hydraulic flow note
The John Deere 4960’s implement flow figure is about 35.2 GPM, so hydraulic attachment choice should be based on flow demand, not horsepower alone.
Hydraulic pressure note
Hydraulic pressure on the John Deere 4960 is 2,530 psi, but hydraulic performance depends on pressure and flow together.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (35.2 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 4960 uses a closed-center hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 4960 is 19.8 gal, but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
