The John Deere 4255 tractor hydraulic pump flow is 26.5 GPM, and hydraulic system pressure is 2,530 psi.
Hydraulic pump flow26.5 GPM
Implement flow26.5 GPM
Total hydraulic flow14.8 GPM
Hydraulic pressure2,530 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity13.5 gal
John Deere 4255 Hydraulic Flow Details
Hydraulic pump flow
26.5 GPM
Implement hydraulic flow
26.5 GPM
Total hydraulic flow
14.8 GPM
Hydraulic system pressure
2,530 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
13.5 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
26.5 GPM
Average
15.7 GPM
Low
5.1 GPM
High
57 GPM
Implement hydraulic flow comparison
This model
26.5 GPM
Average
14.9 GPM
Low
4.8 GPM
High
32 GPM
Total hydraulic flow comparison
This model
14.8 GPM
Average
15.4 GPM
Low
4.8 GPM
High
57 GPM
Hydraulic pressure comparison
This model
2,530 psi
Average
2,336.3 psi
Low
380 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
13.5 gal
Average
9.9 gal
Low
0.7 gal
High
25.4 gal
John Deere 4255 Extra Hydraulic Notes
Hydraulic flow note
The John Deere 4255’s implement flow figure is about 26.5 GPM, so hydraulic attachment choice should be based on flow demand, not horsepower alone.
Hydraulic pressure note
Hydraulic pressure on the John Deere 4255 is 2,530 psi, but hydraulic performance depends on pressure and flow together.
Rear remotes / SCV note
Rear remotes / SCVs are mentioned, but the exact count is not clearly confirmed in the scraped data.
For hydraulic implements, match the implement to the available hydraulic flow (26.5 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 4255 uses a closed-center hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 4255 is 13.5 gal, but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
