The John Deere 4200 tractor hydraulic pump flow is 7.3 GPM, and hydraulic system pressure is 2,125 psi.
Hydraulic pump flow7.3 GPM
Implement flow12.3 GPM
Total hydraulic flow12.3 GPM
Hydraulic pressure2,125 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity6.3 gal
John Deere 4200 Hydraulic Flow Details
Hydraulic pump flow
7.3 GPM
Implement hydraulic flow
12.3 GPM
Total hydraulic flow
12.3 GPM
Hydraulic system pressure
2,125 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
6.3 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
7.3 GPM
Average
15.7 GPM
Low
5.1 GPM
High
57 GPM
Implement hydraulic flow comparison
This model
12.3 GPM
Average
14.9 GPM
Low
4.8 GPM
High
32 GPM
Total hydraulic flow comparison
This model
12.3 GPM
Average
15.4 GPM
Low
4.8 GPM
High
57 GPM
Hydraulic pressure comparison
This model
2,125 psi
Average
2,336.3 psi
Low
380 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
6.3 gal
Average
9.9 gal
Low
0.7 gal
High
25.4 gal
John Deere 4200 Extra Hydraulic Notes
Hydraulic flow note
With about 12.3 GPM implement flow, the John Deere 4200 sits in the compact / utility hydraulic range and is best suited to normal loader use, small hydraulic implements and general utility work.
Hydraulic pressure note
At 2,125 psi, the John Deere 4200’s hydraulic system pressure matters most for lift force, cylinder force and loader response.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (12.3 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 4200 uses a open-center hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 4200 is 6.3 gal, but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
