Quick answer:
The John Deere 3550 tractor hydraulic pump flow is 11.6 GPM, and hydraulic system pressure is 1,500 psi.
Hydraulic pump flow11.6 GPM
Implement flow11.6 GPM
Total hydraulic flow11.6 GPM
Hydraulic pressure1,500 psi
Hydraulic system typeopen-center
John Deere 3550 Hydraulic Flow Details
| Hydraulic pump flow | 11.6 GPM |
|---|---|
| Implement hydraulic flow | 11.6 GPM |
| Total hydraulic flow | 11.6 GPM |
| Hydraulic system pressure | 1,500 psi |
| Hydraulic system type | open-center |
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
Implement hydraulic flow comparison
Total hydraulic flow comparison
Hydraulic pressure comparison
John Deere 3550 Extra Hydraulic Notes
| Hydraulic flow note | With about 11.6 GPM implement flow, the John Deere 3550 sits in the compact / utility hydraulic range and is best suited to normal loader use, small hydraulic implements and general utility work. |
|---|---|
| Hydraulic pressure note | At 1,500 psi, the John Deere 3550’s hydraulic system pressure matters most for lift force, cylinder force and loader response. |
| Rear remotes / SCV note |
|
| Hydraulic system type note | The John Deere 3550’s hydraulic system type is open-center, which is simple and common on many compact and utility tractors. |
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.







