The John Deere 3210 tractor hydraulic pump flow is 12.5 GPM, and hydraulic system pressure is 2,500 psi.
Hydraulic pump flow12.5 GPM
Implement flow13.7 GPM
Total hydraulic flow12.5 GPM
Hydraulic pressure2,500 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity13.7 gal
John Deere 3210 Hydraulic Flow Details
Hydraulic pump flow
12.5 GPM
Implement hydraulic flow
13.7 GPM
Total hydraulic flow
12.5 GPM
Hydraulic system pressure
2,500 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
13.7 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
12.5 GPM
Average
15.7 GPM
Low
5.1 GPM
High
57 GPM
Implement hydraulic flow comparison
This model
13.7 GPM
Average
14.9 GPM
Low
4.8 GPM
High
32 GPM
Total hydraulic flow comparison
This model
12.5 GPM
Average
15.4 GPM
Low
4.8 GPM
High
57 GPM
Hydraulic pressure comparison
This model
2,500 psi
Average
2,336.3 psi
Low
380 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
13.7 gal
Average
9.9 gal
Low
0.7 gal
High
25.4 gal
John Deere 3210 Extra Hydraulic Notes
Hydraulic flow note
For hydraulic work, the key number on the John Deere 3210 is 13.7 GPM implement flow; that points toward normal loader use, small hydraulic implements and general utility work.
Hydraulic pressure note
The John Deere 3210’s hydraulic pressure is listed at 2,500 psi, which is normal utility-tractor pressure; flow still decides attachment speed while pressure affects force.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (13.7 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
System type matters on the John Deere 3210: open-center affects how hydraulic flow and pressure are delivered to valves and implements.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 3210 is 13.7 gal, but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
