The John Deere 3110 tractor hydraulic pump flow is 22 GPM, and hydraulic system pressure is 2,611 psi.
Hydraulic pump flow22 GPM
Implement flow13.7 GPM
Total hydraulic flow13.7 GPM
Hydraulic pressure2,611 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity8.5 gal
John Deere 3110 Hydraulic Flow Details
Hydraulic pump flow
22 GPM
Implement hydraulic flow
13.7 GPM
Total hydraulic flow
13.7 GPM
Hydraulic system pressure
2,611 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
8.5 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
22 GPM
Average
15.7 GPM
Low
5.1 GPM
High
57 GPM
Implement hydraulic flow comparison
This model
13.7 GPM
Average
14.9 GPM
Low
4.8 GPM
High
32 GPM
Total hydraulic flow comparison
This model
13.7 GPM
Average
15.4 GPM
Low
4.8 GPM
High
57 GPM
Hydraulic pressure comparison
This model
2,611 psi
Average
2,336.3 psi
Low
380 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
8.5 gal
Average
9.9 gal
Low
0.7 gal
High
25.4 gal
John Deere 3110 Extra Hydraulic Notes
Hydraulic flow note
With about 13.7 GPM implement flow, the John Deere 3110 sits in the compact / utility hydraulic range and is best suited to normal loader use, small hydraulic implements and general utility work.
Hydraulic pressure note
Hydraulic pressure on the John Deere 3110 is 2,611 psi, but hydraulic performance depends on pressure and flow together.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (13.7 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 3110 uses a closed-center hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 3110 is 8.5 gal, but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
