The John Deere 80 tractor hydraulic pump flow is 6.5 GPM, and hydraulic system pressure is 2,900 psi.
Hydraulic pump flow6.5 GPM
Implement flow30 GPM
Total hydraulic flow33.5 GPM
Hydraulic pressure2,900 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity15 gal
John Deere 80 Hydraulic Flow Details
Hydraulic pump flow
6.5 GPM
Implement hydraulic flow
30 GPM
Total hydraulic flow
33.5 GPM
Hydraulic system pressure
2,900 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
15 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
6.5 GPM
Average
20.7 GPM
Low
3.7 GPM
High
110 GPM
Implement hydraulic flow comparison
This model
30 GPM
Average
21.2 GPM
Low
3.7 GPM
High
110 GPM
Total hydraulic flow comparison
This model
33.5 GPM
Average
19.9 GPM
Low
3.7 GPM
High
55 GPM
Hydraulic pressure comparison
This model
2,900 psi
Average
2,198.4 psi
Low
700 psi
High
4,200 psi
Hydraulic fluid capacity comparison
This model
15 gal
Average
12.1 gal
Low
1.2 gal
High
55 gal
John Deere 80 Extra Hydraulic Notes
Hydraulic flow note
For attachments, the John Deere 80’s implement hydraulic flow matters more than total flow. The listed gap is about 3.5 GPM between implement flow and total flow.
Hydraulic pressure note
At 2,900 psi, the John Deere 80’s hydraulic system pressure matters most for lift force, cylinder force and loader response.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (30 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 80 uses a closed-center hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 80 is 15 gal, but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
