The New Holland TL70A tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 13.5 gpm | 51.1 lpm, hydraulic pressure is 2872 psi | 198.0 bar, and hydraulic type is open center.
Hydraulic Flow13.5 gpm | 51.1 lpm
Pressure2872 psi | 198.0 bar
Hydraulic Typeopen center
Valves / Remotes3 * Maximum | 3
Lift Capacity10031 lbs | 4550 kg
New Holland TL70A Hydraulic Capacity & Flow Specs
Hydraulic type
open center
Hydraulic pressure
2872 psi | 198.0 bar
Pump flow
13.5 gpm | 51.1 lpm
Rear remotes
3 * Maximum | 3
New Holland TL70A Hitch, Remote & Lift Specs
Rear hitch type
II
Rear hitch control
mechanical draft control | mechanical draft control electronic draft control Optional
Rear lift
10031 lbs | 4550 kg
New Holland TL70A Useful Hydraulic Calculations
Rear lift per pump gpm
743 lb per gpm
Estimated hydraulic horsepower
about 22.6 hydraulic hp from listed pressure and pump flow
New Holland TL70A Hydraulic Comparison Charts
Pump flow comparison
This model
13.5 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Hydraulic pressure comparison
This model
2,872 psi
Average
2,600 psi
Low
2,100 psi
High
3,200 psi
Rear lift comparison
This model
10,031 lb
Average
7,000 lb
Low
3,000 lb
High
12,000 lb
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland TL70A Steering, Brakes & Mechanical Hydraulic Notes
Steering
hydrostatic power
Brakes
Wet disc brakes
Trailer brakes
hydraulic Optional
Differential lock
electro-hydraulic
New Holland TL70A Extra Hydraulic Notes
Rear valves
3 * Maximum
Rear Valves
3
New Holland TL70A Hydraulic Capacity FAQ
Why is the New Holland TL70A hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland TL70A, but pump flow is 13.5 gpm | 51.1 lpm, pressure is 2872 psi | 198.0 bar, system type is open center, and lift is listed as 10031 lbs | 4550 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland TL70A hydraulics feel fast or slow?
The useful speed clue is 13.5 gpm | 51.1 lpm pump flow, close to the 14 gpm benchmark for this group. It should be normal for general tractor hydraulic work, assuming the pump and valves are healthy.
What does the New Holland TL70A hydraulic pressure tell you?
The pressure spec is 2872 psi | 198.0 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the New Holland TL70A?
On the New Holland TL70A, 13.5 gpm | 51.1 lpm pump flow is around normal for loader/cylinder speed, 2,872 psi pressure affects force more than speed, and 10,031 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland TL70A?
For implement matching, the useful checks are 13.5 gpm flow, 2,872 psi pressure, 10,031 lb listed lift, and 3 * Maximum | 3 remote/valve listing. That combination is in the normal flow range for this size group, normal on pressure for the class, and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland TL70A rear lift capacity strong?
The listed lift figure is 10031 lbs | 4550 kg, above the 7,000 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Are the New Holland TL70A hydraulic remotes enough?
The New Holland TL70A remote/valve listing is 3 * Maximum | 3. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the New Holland TL70A hydraulics handle long hydraulic jobs?
The useful heat clues are 13.5 gpm flow, 2,872 psi pressure, and about 22.6 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the New Holland TL70A make on paper?
Using 2,872 psi and 13.5 gpm, the rough pressure-flow estimate is about 22.6 hydraulic hp. That is a useful middle-range hydraulic power figure for normal tractor work. It is a comparison number, not engine horsepower.
What do the New Holland TL70A hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II, hitch control is mechanical draft control | mechanical draft control electronic draft control Optional, and listed lift is 10031 lbs | 4550 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
