The John Deere 200 tractor hydraulic pump flow is 30 GPM, and hydraulic system pressure is 2,200 psi.
Hydraulic pump flow30 GPM
Implement flow14 GPM
Total hydraulic flow17.1 GPM
Hydraulic pressure2,200 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity5 qt (1.2 gal)
John Deere 200 Hydraulic Flow Details
Hydraulic pump flow
30 GPM
Implement hydraulic flow
14 GPM
Total hydraulic flow
17.1 GPM
Hydraulic system pressure
2,200 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
5 qt (1.2 gal)
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
30 GPM
Average
20.7 GPM
Low
3.7 GPM
High
110 GPM
Implement hydraulic flow comparison
This model
14 GPM
Average
21.2 GPM
Low
3.7 GPM
High
110 GPM
Total hydraulic flow comparison
This model
17.1 GPM
Average
19.9 GPM
Low
3.7 GPM
High
55 GPM
Hydraulic pressure comparison
This model
2,200 psi
Average
2,198.4 psi
Low
700 psi
High
4,200 psi
Hydraulic fluid capacity comparison
This model
1.2 gal
Average
12.1 gal
Low
1.2 gal
High
55 gal
John Deere 200 Extra Hydraulic Notes
Hydraulic flow note
The John Deere 200’s total flow is higher than implement flow, so use the implement-flow number when matching hydraulic tools and SCV-driven equipment.
Hydraulic pressure note
The John Deere 200’s hydraulic pressure is listed at 2,200 psi, which is normal utility-tractor pressure; flow still decides attachment speed while pressure affects force.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (14 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 200 uses a closed-center hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Hydraulic fluid capacity note
The John Deere 200’s hydraulic fluid capacity is listed as 5 qt (1.2 gal); check the operator manual before servicing because capacity can change with transmission, hydraulic options and market.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
