The John Deere 62 tractor hydraulic pump flow is 29 GPM, and hydraulic system pressure is 2,900 psi.
Hydraulic pump flow29 GPM
Implement flow29 GPM
Total hydraulic flow29 GPM
Hydraulic pressure2,900 psi
Hydraulic system typeclosed-center pressure-flow compensated
Hydraulic fluid capacity13.2 gal
John Deere 62 Hydraulic Flow Details
Hydraulic pump flow
29 GPM
Implement hydraulic flow
29 GPM
Total hydraulic flow
29 GPM
Hydraulic system pressure
2,900 psi
Hydraulic system type
closed-center pressure-flow compensated
Hydraulic fluid capacity
13.2 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
29 GPM
Average
20.7 GPM
Low
3.7 GPM
High
110 GPM
Implement hydraulic flow comparison
This model
29 GPM
Average
21.2 GPM
Low
3.7 GPM
High
110 GPM
Total hydraulic flow comparison
This model
29 GPM
Average
19.9 GPM
Low
3.7 GPM
High
55 GPM
Hydraulic pressure comparison
This model
2,900 psi
Average
2,198.4 psi
Low
700 psi
High
4,200 psi
Hydraulic fluid capacity comparison
This model
13.2 gal
Average
12.1 gal
Low
1.2 gal
High
55 gal
John Deere 62 Extra Hydraulic Notes
Hydraulic flow note
The John Deere 62 should be matched to implements that fit its 29 GPM hydraulic-flow range.
Hydraulic pressure note
The John Deere 62’s hydraulic pressure is listed at 2,900 psi, which is strong tractor hydraulic pressure; flow still decides attachment speed while pressure affects force.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (29 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 62 uses a closed-center pressure-flow compensated hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 62 is 13.2 gal, but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
