The John Deere 6M 140 tractor hydraulic pump flow is 21 GPM, and hydraulic system pressure is 2,900 psi.
Hydraulic pump flow21 GPM
Implement flow21 GPM
Total hydraulic flow21 GPM
Hydraulic pressure2,900 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity21 gal
John Deere 6M 140 Hydraulic Flow Details
Hydraulic pump flow
21 GPM
Implement hydraulic flow
21 GPM
Total hydraulic flow
21 GPM
Hydraulic system pressure
2,900 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
21 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
21 GPM
Average
37.8 GPM
Low
3.3 GPM
High
85 GPM
Implement hydraulic flow comparison
This model
21 GPM
Average
37.9 GPM
Low
3.3 GPM
High
110 GPM
Total hydraulic flow comparison
This model
21 GPM
Average
38.2 GPM
Low
3.3 GPM
High
85 GPM
Hydraulic pressure comparison
This model
2,900 psi
Average
2,672.7 psi
Low
610 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
21 gal
Average
28.5 gal
Low
0.9 gal
High
84 gal
John Deere 6M 140 Extra Hydraulic Notes
Hydraulic flow note
The John Deere 6M 140’s implement flow figure is about 21 GPM, so hydraulic attachment choice should be based on flow demand, not horsepower alone.
Hydraulic pressure note
Hydraulic pressure on the John Deere 6M 140 is 2,900 psi, but hydraulic performance depends on pressure and flow together.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (21 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 6M 140’s hydraulic system type is open-center, which is simple and common on many compact and utility tractors.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 6M 140 is 21 gal, but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
