The John Deere WA 17 tractor tire size is front 28.5-26 and the rear is 28.5-26.
Front tire28.5-26
Rear tire28.5-26
Front/rear setupSame front and rear tire size
Tire pressure28 PSI
Rim diameter26 in front/rear
John Deere WA 17 Tire Size Details
Front tire size
28.5-26
Rear tire size
28.5-26
Front/rear setup
Same front and rear tire size
R1 ag tire size
23.1-30, 28.5-26
Tire construction
Bias/imperial tire
Section width
28.5 in
Rim diameter
26 in
Tire pressure
28 PSI
Tire size alternatives / conversions
18.4-30, 460/85R30
Tire Size Comparison Chart
Front rim diameter comparison
This model
26 in
Average
17.1 in
Low
4 in
High
50 in
Rear rim diameter comparison
This model
26 in
Average
25.5 in
Low
0 in
High
50 in
John Deere WA 17 Extra Tire Notes
Tire size note
The John Deere WA 17 uses 28.5-26 on both the front and rear in this data, so the same tire-size details apply to both axles: bias/imperial tire, 28.5 in section width, 26 in rim
Pressure note
For the John Deere WA 17 with front 28.5-26 and rear 28.5-26 tires, the pressure values captured in the answer are 28 PSI. Tire pressure is load-dependent, so use this as a reference value rather than a universal setting
Front/rear matching note
The John Deere WA 17 data shows the same tire size front and rear (28.5-26). That usually makes the visible front/rear size relationship simpler, but approved tire and wheel combinations should still be checked before mixing brands or changing sizes
Official information note
Mistakes do happen. Tire sizes can change by year, axle, wheel/rim option, tyre brand, tread type and local market. Please check the tire sidewall, operator manual and official deere.com website for official information.
