The New Holland Workmaster 40 dimensions found are: length is 117.7 inches | 298 cm, width is 66.5 inches | 168 cm, and height is 87.7 inches | 222 cm.
Length117.7 inches | 298 cm
Width66.5 inches | 168 cm
Height87.7 inches | 222 cm
New Holland Workmaster 40 Dimensions
Overall length
117.7 inches | 298 cm
Overall width
66.5 inches | 168 cm
Overall height
87.7 inches | 222 cm
Front tread
45.6 inches | 115 cm
Rear tread
50.5 inches | 128 cm
New Holland Workmaster 40 Weight
Weight
2900 lbs | 1315 kg
New Holland Workmaster 40 Dimension Comparison Charts
Length comparison
This model
117.7 in
Average
145 in
Low
120 in
High
175 in
Width comparison
This model
66.5 in
Average
74 in
Low
60 in
High
90 in
Height comparison
This model
87.7 in
Average
100 in
Low
86 in
High
120 in
Weight comparison
This model
2,900 lbs
Average
5,500 lbs
Low
3,500 lbs
High
8,000 lbs
Floor space footprint
This model
54 sq ft
Average
75 sq ft
Low
50 sq ft
High
110 sq ft
Benchmarks use practical low, average and high dimension ranges for the utility tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
New Holland Workmaster 40 Extra Dimension Notes
Storage and fit note
Using the first listed dimension values, the New Holland Workmaster 40 is about 117.7 inches | 298 cm long, about 66.5 inches | 168 cm wide, and about 87.7 inches | 222 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.
New Holland Workmaster 40 Dimensions FAQ
Is the New Holland Workmaster 40 a long tractor?
The New Holland Workmaster 40 is on the shorter side at 117.7 in, which is below the 145 in benchmark average. That makes its listed length easier to fit than many tractors in the same utility tractor range.
Is the New Holland Workmaster 40 narrow enough for tight storage?
The listed width is middle-of-the-pack at 66.5 in, which is close to the 74 in benchmark average. It is not especially narrow, but it is not unusually wide either.
Is the New Holland Workmaster 40 tall for a shed or garage?
The listed height is low for the category at 87.7 in, which is below the 100 in benchmark average. That is better for low shed doors, but attachments and ROPS can still change the real clearance needed.
How much floor space does the New Holland Workmaster 40 need?
The bare footprint is about 54 sq ft from a 9.8 ft length and 5.5 ft width. That is below the 75 sq ft benchmark for this category.
Is the New Holland Workmaster 40 heavy for its size?
The listed weight is light for the category at 2,900 lbs, which is below the 5,500 lbs benchmark average. That points to an easier-to-transport tractor than heavier models in the same class, before ballast or attachments are added.
Will the New Holland Workmaster 40 fit easily in storage?
The fit numbers are fairly normal for the category: length 117.7 in, width 66.5 in and height 87.7 in. It should be judged as an average-size tractor for its benchmark group, not a tiny one.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official newholland.com website before making shed, trailer, garage or transport decisions.
