The New Holland TS6030 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 7 gpm | 26.5 lpm, hydraulic type is open center, and valves/remotes are listed as 2.
New Holland TS6030 Hydraulic Capacity & Flow Specs
| Hydraulic type | open center |
|---|---|
| Optional pump flow | 13 gpm | 49.2 lpm | 22 gpm (Optional) | 83.3 lpm |
| Steering flow | 7 gpm | 26.5 lpm |
| Hydraulic valves | 2 |
New Holland TS6030 Hitch, Remote & Lift Specs
| Rear hitch type | 2 |
|---|---|
| Rear hitch control | mechanical top-link draft sensing |
| Rear lift at 24 inches | 3,600 lbs | 1632 kg |
New Holland TS6030 Hydraulic Comparison Charts
Pump flow comparison
Rear lift comparison
Valve / remote count comparison
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland TS6030 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | hydrostatic power |
|---|---|
| Brakes | Wet disc brakes |
New Holland TS6030 Hydraulic Capacity FAQ
Why is the New Holland TS6030 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland TS6030, but steering flow is 7 gpm | 26.5 lpm, system type is open center, and lift is listed as 3,600 lbs | 1632 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland TS6030 hydraulics feel fast or slow?
The useful speed clue is 7 gpm | 26.5 lpm steering flow, below the 8 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What matters most for loader speed on the New Holland TS6030?
On the New Holland TS6030, 7 gpm | 26.5 lpm steering flow points to slower loader and cylinder movement and 3,600 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland TS6030?
For implement matching, the useful checks are 7 gpm flow, 3,600 lb listed lift, 2 remote/valve listing, and 2 hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland TS6030 rear lift capacity strong?
The listed lift figure is 3,600 lbs | 1632 kg, above the 1,800 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Are the New Holland TS6030 hydraulic remotes enough?
The New Holland TS6030 lists 2 for valves/remotes. That is generous for this category and better for implements with more than one hydraulic function.
Will the New Holland TS6030 hydraulics handle long hydraulic jobs?
The useful heat clues are 7 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What do the New Holland TS6030 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is 2, hitch control is mechanical top-link draft sensing, and listed lift is 3,600 lbs | 1632 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the New Holland TS6030 use?
The hydraulic system is listed as open center with 7 gpm | 26.5 lpm steering flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the New Holland TS6030 hydraulics?
For service planning, the system is listed as open center and flow is listed at 7 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
