The New Holland TS6.140 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 9 gpm | 34.1 lpm, and valves/remotes are listed as 2 to 4.
Hydraulic Flow9 gpm | 34.1 lpm
Valves / Remotes2 to 4
Lift Capacity3600 lbs | 1632 kg
New Holland TS6.140 Hydraulic Capacity & Flow Specs
Optional pump flow
13 gpm | 49.2 lpm | 22 gpm (Optional) | 83.3 lpm
Steering flow
9 gpm | 34.1 lpm
Rear remotes
2 to 4
New Holland TS6.140 Hitch, Remote & Lift Specs
Rear hitch type
II
Rear hitch control
top link draft sensing
Rear lift at 24 inches
3600 lbs | 1632 kg
New Holland TS6.140 Hydraulic Comparison Charts
Pump flow comparison
This model
9 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Rear lift comparison
This model
3,600 lb
Average
7,000 lb
Low
3,000 lb
High
12,000 lb
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland TS6.140 Hydraulic Capacity FAQ
Why is the New Holland TS6.140 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland TS6.140, but steering flow is 9 gpm | 34.1 lpm and lift is listed as 3600 lbs | 1632 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland TS6.140 hydraulics feel fast or slow?
The useful speed clue is 9 gpm | 34.1 lpm steering flow, below the 14 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What matters most for loader speed on the New Holland TS6.140?
On the New Holland TS6.140, 9 gpm | 34.1 lpm steering flow points to slower loader and cylinder movement and 3,600 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland TS6.140?
For implement matching, the useful checks are 9 gpm flow, 3,600 lb listed lift, 2 to 4 remote/valve listing, and II hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland TS6.140 rear lift capacity strong?
The listed lift figure is 3600 lbs | 1632 kg, below the 7,000 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the New Holland TS6.140 hydraulic remotes enough?
The New Holland TS6.140 remote/valve listing is 2 to 4. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the New Holland TS6.140 hydraulics handle long hydraulic jobs?
The useful heat clues are 9 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What do the New Holland TS6.140 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II, hitch control is top link draft sensing, and listed lift is 3600 lbs | 1632 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What should you check before servicing the New Holland TS6.140 hydraulics?
For service planning, flow is listed at 9 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
