The New Holland TJ500 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 42 gpm | 159.0 lpm, hydraulic type is closed center load sensing, and valves/remotes are listed as 4 to 7.
New Holland TJ500 Hydraulic Capacity & Flow Specs
| Hydraulic type | closed center load sensing |
|---|---|
| Total hydraulic flow | 42 gpm | 159.0 lpm |
| SCV flow | 35 gpm | 132.5 lpm |
| Rear remotes | 4 to 7 |
New Holland TJ500 Hydraulic Comparison Charts
Pump flow comparison
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland TJ500 Steering, Brakes & Mechanical Hydraulic Notes
| Brakes | Hydraulic wet disc brakes |
|---|
New Holland TJ500 Hydraulic Capacity FAQ
Why is the New Holland TJ500 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland TJ500, but total hydraulic flow is 42 gpm | 159.0 lpm and system type is closed center load sensing. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland TJ500 hydraulics feel fast or slow?
The useful speed clue is 42 gpm | 159.0 lpm total hydraulic flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What matters most for loader speed on the New Holland TJ500?
On the New Holland TJ500, 42 gpm | 159.0 lpm total hydraulic flow points to slower loader and cylinder movement. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland TJ500?
For implement matching, the useful checks are 42 gpm flow and 4 to 7 remote/valve listing. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Are the New Holland TJ500 hydraulic remotes enough?
The New Holland TJ500 remote/valve listing is 4 to 7. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the New Holland TJ500 hydraulics handle long hydraulic jobs?
The useful heat clues are 42 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What hydraulic system does the New Holland TJ500 use?
The hydraulic system is listed as closed center load sensing with 42 gpm | 159.0 lpm total hydraulic flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the New Holland TJ500 hydraulics?
For service planning, the system is listed as closed center load sensing and flow is listed at 42 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
