The New Holland TJ480 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 33 gpm | 124.9 lpm, hydraulic pressure is 2000 psi | 137.9 bar, and hydraulic type is closed center load sensing (CCLS).
New Holland TJ480 Hydraulic Capacity & Flow Specs
| Hydraulic type | closed center load sensing (CCLS) |
|---|---|
| Hydraulic pressure | 2000 psi | 137.9 bar |
| Pump flow | 33 gpm | 124.9 lpm |
| Total hydraulic flow | 40 gpm | 151.4 lpm | 55 gpm (Optional) | 208.2 lpm |
| Hydraulic valves | 4 to 9 |
New Holland TJ480 Hitch, Remote & Lift Specs
| Rear hitch type | IVN (Optional) |
|---|---|
| Rear lift at 24 inches | 19,620 lbs | 8899 kg |
New Holland TJ480 Useful Hydraulic Calculations
| Total flow vs pump flow | 121.2% of listed pump flow |
|---|---|
| Rear lift per pump gpm | 594.5 lb per gpm |
| Estimated hydraulic horsepower | about 38.5 hydraulic hp from listed pressure and pump flow |
New Holland TJ480 Hydraulic Comparison Charts
Pump flow comparison
Hydraulic pressure comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland TJ480 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | hydrostatic power |
|---|---|
| Brakes | hydraulic wet disc brakes |
New Holland TJ480 Extra Hydraulic Notes
| Total flow | 40 gpm | 151.4 lpm |
|---|
New Holland TJ480 Hydraulic Capacity FAQ
Why is the New Holland TJ480 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland TJ480, but pump flow is 33 gpm | 124.9 lpm, pressure is 2000 psi | 137.9 bar, system type is closed center load sensing (CCLS), and lift is listed as 19,620 lbs | 8899 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland TJ480 hydraulics feel fast or slow?
The useful speed clue is 33 gpm | 124.9 lpm pump flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the New Holland TJ480 hydraulic pressure tell you?
The pressure spec is 2000 psi | 137.9 bar, below the 3,100 psi benchmark. Pressure is the force side of hydraulics, so this matters more for lift and cylinder push than for speed.
What matters most for loader speed on the New Holland TJ480?
On the New Holland TJ480, 33 gpm | 124.9 lpm pump flow points to slower loader and cylinder movement, 2,000 psi pressure affects force more than speed, and 19,620 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland TJ480?
For implement matching, the useful checks are 33 gpm flow, 2,000 psi pressure, 19,620 lb listed lift, and 4 to 9 remote/valve listing. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, not a brute-force hydraulic setup compared with higher-pressure systems, and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland TJ480 rear lift capacity strong?
The listed lift figure is 19,620 lbs | 8899 kg, above the 15,500 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Are the New Holland TJ480 hydraulic remotes enough?
The New Holland TJ480 remote/valve listing is 4 to 9. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the New Holland TJ480 hydraulics handle long hydraulic jobs?
The useful heat clues are 33 gpm flow, 2,000 psi pressure, and about 38.5 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the New Holland TJ480 make on paper?
Using 2,000 psi and 33 gpm, the rough pressure-flow estimate is about 38.5 hydraulic hp. That is a serious hydraulic power figure for demanding hydraulic functions. It is a comparison number, not engine horsepower.
What do the New Holland TJ480 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is IVN (Optional) and listed lift is 19,620 lbs | 8899 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
