The New Holland TI4.50 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 10 gpm | 37.9 lpm, and valves/remotes are listed as 2.
Hydraulic Flow10 gpm | 37.9 lpm
Valves / Remotes2
Lift Capacity3307 lbs | 1500 kg
New Holland TI4.50 Hydraulic Capacity & Flow Specs
Pump flow
10 gpm | 37.9 lpm
Hydraulic valves
2
New Holland TI4.50 Hitch, Remote & Lift Specs
Rear hitch type
I/IN
Rear lift
3307 lbs | 1500 kg
New Holland TI4.50 Useful Hydraulic Calculations
Rear lift per pump gpm
330.7 lb per gpm
Pump flow per listed valve
5 gpm per valve
New Holland TI4.50 Hydraulic Comparison Charts
Pump flow comparison
This model
10 gpm
Average
8 gpm
Low
3.5 gpm
High
14 gpm
Rear lift comparison
This model
3,307 lb
Average
1,800 lb
Low
800 lb
High
3,200 lb
Valve / remote count comparison
This model
2
Average
1
Low
0
High
3
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland TI4.50 Steering, Brakes & Mechanical Hydraulic Notes
Brakes
Hydraulic wet disc brakes
New Holland TI4.50 Hydraulic Capacity FAQ
Why is the New Holland TI4.50 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland TI4.50, but pump flow is 10 gpm | 37.9 lpm and lift is listed as 3307 lbs | 1500 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland TI4.50 hydraulics feel fast or slow?
The useful speed clue is 10 gpm | 37.9 lpm pump flow, above the 8 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What matters most for loader speed on the New Holland TI4.50?
On the New Holland TI4.50, 10 gpm | 37.9 lpm pump flow points to quicker loader and cylinder movement and 3,307 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland TI4.50?
For implement matching, the useful checks are 10 gpm flow, 3,307 lb listed lift, 2 remote/valve listing, and I/IN hitch. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland TI4.50 rear lift capacity strong?
The listed lift figure is 3307 lbs | 1500 kg, above the 1,800 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Are the New Holland TI4.50 hydraulic remotes enough?
The New Holland TI4.50 lists 2 for valves/remotes. That is generous for this category and better for implements with more than one hydraulic function.
Will the New Holland TI4.50 hydraulics handle long hydraulic jobs?
The useful heat clues are 10 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What do the New Holland TI4.50 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is I/IN and listed lift is 3307 lbs | 1500 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What should you check before servicing the New Holland TI4.50 hydraulics?
For service planning, flow is listed at 10 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
