The New Holland TC24D tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 4.9 gpm | 18.5 lpm.
Hydraulic Flow4.9 gpm | 18.5 lpm
New Holland TC24D Hydraulic Capacity & Flow Specs
Pump flow
4.9 gpm | 18.5 lpm
Steering flow
7.65 gpm | 29.0 lpm
New Holland TC24D Useful Hydraulic Calculations
Steering flow vs pump flow
156.1% of listed pump flow
New Holland TC24D Hydraulic Comparison Charts
Pump flow comparison
This model
4.9 gpm
Average
8 gpm
Low
3.5 gpm
High
14 gpm
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland TC24D Steering, Brakes & Mechanical Hydraulic Notes
Steering
Power steering
New Holland TC24D Hydraulic Capacity FAQ
Why is the New Holland TC24D hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland TC24D, but pump flow is 4.9 gpm | 18.5 lpm. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland TC24D hydraulics feel fast or slow?
The useful speed clue is 4.9 gpm | 18.5 lpm pump flow, below the 8 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What matters most for loader speed on the New Holland TC24D?
On the New Holland TC24D, 4.9 gpm | 18.5 lpm pump flow points to slower loader and cylinder movement. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland TC24D?
For implement matching, the useful checks are 4.9 gpm flow. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Will the New Holland TC24D hydraulics handle long hydraulic jobs?
The useful heat clues are 4.9 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What should you check before servicing the New Holland TC24D hydraulics?
For service planning, flow is listed at 4.9 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
