The New Holland T3030 tractor engine horsepower is 46.9 hp | 35.0 kW.
New Holland T3030 Horsepower Specs
| Engine horsepower | 46.9 hp | 35.0 kW |
|---|
New Holland T3030 Useful Horsepower Calculations
| Engine size per engine horsepower | 2.8 ci per engine hp |
|---|---|
| Engine horsepower per liter | 21.3 engine hp per L |
New Holland T3030 Engine Specs
| Displacement | 133.6 ci | 2.2 L |
|---|---|
| Bore and stroke | 3.465×3.543 inches | 88 x 90 mm |
| Rated RPM | 2800 |
| Torque | 104 lb-ft | 141.0 Nm |
| Torque RPM | 1200 |
New Holland T3030 Fuel, Cooling, Starting & Service Specs
| Starter volts | 12 |
|---|---|
| Battery volts | 12 |
New Holland T3030 Horsepower Comparison Charts
Engine horsepower comparison
Displacement comparison
Torque comparison
Rated RPM comparison
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
New Holland T3030 Horsepower FAQ
How much horsepower does the New Holland T3030 have?
The listed engine output is 46.9 hp, above the 35 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 46.9 hp.
How big is the New Holland T3030 engine?
The engine displacement is 133.6 ci, above the 110 ci benchmark average. Bigger displacement can help low-rpm pull and load-holding feel.
How much torque does the New Holland T3030 have?
The listed torque is 104 lb-ft, close to the 95 lb-ft benchmark average. The 104 lb-ft figure is a normal torque result for this class.
What rpm is the New Holland T3030 rated at?
The rated speed is 2,800 rpm, above the 2,400 rpm benchmark average. A higher 2,800 rpm rating can make power well but may feel busier under load.
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official newholland.com website before buying parts, sizing implements or making repair decisions.
