The New Holland Boomer 37 tractor engine horsepower is 36.2 hp | 27.0 kW.
Engine HP36.2 hp | 27.0 kW
Displacement91.3 ci | 1.5 L
New Holland Boomer 37 Horsepower Specs
Engine gross horsepower
36.2 hp | 27.0 kW
New Holland Boomer 37 Useful Horsepower Calculations
Engine size per engine horsepower
2.5 ci per engine hp
Engine horsepower per liter
24.1 engine hp per L
New Holland Boomer 37 Engine Specs
Engine type
turbocharged diesel
Displacement
91.3 ci | 1.5 L
Bore and stroke
3.307×3.543 inches | 84 x 90 mm
Rated RPM
2600
New Holland Boomer 37 Fuel, Cooling, Starting & Service Specs
Starter volts
12
Battery volts
12
New Holland Boomer 37 Horsepower Comparison Charts
Engine horsepower comparison
This model
36.2 hp
Average
35 hp
Low
15 hp
High
60 hp
Displacement comparison
This model
91.3 ci
Average
110 ci
Low
50 ci
High
180 ci
Rated RPM comparison
This model
2,600 rpm
Average
2,400 rpm
Low
1,800 rpm
High
3,000 rpm
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
New Holland Boomer 37 Horsepower FAQ
How much horsepower does the New Holland Boomer 37 have?
The listed engine output is 36.2 hp, close to the 35 hp benchmark average. That puts the tractor in a normal working range for this benchmark group, with 36.2 hp as the main engine number.
How big is the New Holland Boomer 37 engine?
The engine displacement is 91.3 ci, below the 110 ci benchmark average. Smaller displacement usually means less engine size behind each horsepower number.
What rpm is the New Holland Boomer 37 rated at?
The rated speed is 2,600 rpm, close to the 2,400 rpm benchmark average. The 2,600 rpm figure is around normal for this class.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official newholland.com website before buying parts, sizing implements or making repair decisions.
