The New Holland 9882 tractor engine horsepower is 425 hp | 316.9 kW, and the drawbar horsepower is 338 hp | 252.0 kW.
Engine HP425 hp | 316.9 kW
Drawbar HP338 hp | 252.0 kW
Torque1400 lb-ft | 1898.4 Nm
Displacement855 ci | 14.0 L
New Holland 9882 Horsepower Specs
Engine horsepower
425 hp | 316.9 kW
Drawbar horsepower claimed
338 hp | 252.0 kW
Drawbar horsepower tested
346.4 hp | 258.3 kW
New Holland 9882 Useful Horsepower Calculations
Drawbar-to-engine power transfer
79.5% of engine hp reaches the drawbar
Engine size per engine horsepower
2 ci per engine hp
Engine horsepower per liter
30.4 engine hp per L
New Holland 9882 Engine Specs
Engine type
turbocharged aftercooled diesel
Displacement
855 ci | 14.0 L
Bore and stroke
5.50×6.00 inches | 140 x 152 mm
Compression
16.5:1
Rated RPM
2100
Torque
1400 lb-ft | 1898.4 Nm
Torque RPM
1400
New Holland 9882 Fuel, Cooling, Starting & Service Specs
Fuel capacity
Usable tank capacity. Total capacity is 245 US Gallons: 230 gal | 870.6 L
Starter volts
12
Battery volts
12
Firing order
1-5-3-6-2-4
Idle RPM
900-2400
New Holland 9882 Horsepower Comparison Charts
Engine horsepower comparison
This model
425 hp
Average
210 hp
Low
120 hp
High
380 hp
Drawbar horsepower comparison
This model
338 hp
Average
150 hp
Low
85 hp
High
280 hp
Displacement comparison
This model
855 ci
Average
520 ci
Low
360 ci
High
750 ci
Torque comparison
This model
1,400 lb-ft
Average
700 lb-ft
Low
350 lb-ft
High
1,250 lb-ft
Rated RPM comparison
This model
2,100 rpm
Average
2,100 rpm
Low
1,600 rpm
High
2,500 rpm
Benchmarks use practical low, average and high ranges for the large ag tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
New Holland 9882 Horsepower FAQ
How much horsepower does the New Holland 9882 have?
The listed engine output is 425 hp, above the 210 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 425 hp.
How much drawbar horsepower does the New Holland 9882 have?
The listed drawbar output is 338 hp, above the 150 hp benchmark average. That makes the 338 hp drawbar number more useful than engine hp for tillage and heavy pulling.
How efficient is the New Holland 9882 for pulling work?
The drawbar-to-engine transfer is about 79.5%, from 425 engine hp to 338 drawbar hp. That gives a more grounded pulling estimate than engine horsepower alone.
How big is the New Holland 9882 engine?
The engine displacement is 855 ci, above the 520 ci benchmark average. Bigger displacement can help low-rpm pull and load-holding feel.
How much torque does the New Holland 9882 have?
The listed torque is 1,400 lb-ft, above the 700 lb-ft benchmark average. The 1,400 lb-ft figure is useful for lugging, loader work and heavy PTO load recovery.
What rpm is the New Holland 9882 rated at?
The rated speed is 2,100 rpm, close to the 2,100 rpm benchmark average. The 2,100 rpm figure is around normal for this class.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official newholland.com website before buying parts, sizing implements or making repair decisions.
