New Holland T9020 Horsepower & PTO HP

Quick answer:

The New Holland T9020 tractor engine horsepower is 335 hp | 249.8 kW, PTO horsepower is 274 hp | 204.3 kW, and the drawbar horsepower is 258.63 hp | 192.9 kW.

Engine HP335 hp | 249.8 kW
PTO HP274 hp | 204.3 kW
Drawbar HP258.63 hp | 192.9 kW
PTO Transfer81.8%
Torque1198 lb-ft | 1624.5 Nm
Displacement540 ci | 8.9 L

New Holland T9020 Horsepower Specs

Engine horsepower 335 hp | 249.8 kW
PTO horsepower claimed 274 hp | 204.3 kW
PTO horsepower tested 323.31 hp | 241.1 kW
Drawbar horsepower tested 258.63 hp | 192.9 kW

New Holland T9020 Useful Horsepower Calculations

PTO-to-engine power transfer 81.8% of engine hp reaches the PTO
Drawbar-to-engine power transfer 77.2% of engine hp reaches the drawbar
Drawbar-to-PTO power ratio 94.4% drawbar hp vs PTO hp
Engine size per PTO horsepower 2 ci per PTO hp
PTO horsepower per liter 30.8 PTO hp per L
Engine size per engine horsepower 1.6 ci per engine hp
Engine horsepower per liter 37.6 engine hp per L
Torque per PTO horsepower 4.4 lb-ft per PTO hp
Rated speed per PTO horsepower 7.3 rpm per PTO hp

New Holland T9020 Engine Specs

Engine type turbocharged aftercooled diesel
Displacement 540 ci | 8.9 L
Bore and stroke 4.488×5.689 inches | 114 x 145 mm
Compression 16.6:1
Rated RPM 2000
Torque 1198 lb-ft | 1624.5 Nm
Torque RPM 1400

New Holland T9020 Fuel, Cooling, Starting & Service Specs

Starter volts 24
Battery volts 12

New Holland T9020 Horsepower Comparison Charts

Engine horsepower comparison

This model

335 hp

Average

210 hp

Low

120 hp

High

380 hp

PTO horsepower comparison

This model

274 hp

Average

175 hp

Low

100 hp

High

320 hp

Drawbar horsepower comparison

This model

258.6 hp

Average

150 hp

Low

85 hp

High

280 hp

Displacement comparison

This model

540 ci

Average

520 ci

Low

360 ci

High

750 ci

Torque comparison

This model

1,198 lb-ft

Average

700 lb-ft

Low

350 lb-ft

High

1,250 lb-ft

Rated RPM comparison

This model

2,000 rpm

Average

2,100 rpm

Low

1,600 rpm

High

2,500 rpm

Engine size per PTO HP

This model

2 ci/hp

Average

3.3 ci/hp

Low

2 ci/hp

High

5.2 ci/hp

Benchmarks use practical low, average and high ranges for the large ag tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.

New Holland T9020 Horsepower FAQ

How much horsepower does the New Holland T9020 have?

The listed engine output is 335 hp, above the 210 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 335 hp.

How much PTO horsepower does the New Holland T9020 have?

The listed PTO output is 274 hp, above the 175 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 274 hp.

How much drawbar horsepower does the New Holland T9020 have?

The listed drawbar output is 258.6 hp, above the 150 hp benchmark average. That makes the 258.6 hp drawbar number more useful than engine hp for tillage and heavy pulling.

How much engine power reaches the PTO on the New Holland T9020?

The PTO-to-engine transfer works out to 81.8%, from 335 engine hp to 274 PTO hp. That is a normal usable range for judging PTO implement fit.

How efficient is the New Holland T9020 for pulling work?

The drawbar-to-engine transfer is about 77.2%, from 335 engine hp to 258.6 drawbar hp. That gives a more grounded pulling estimate than engine horsepower alone.

Is the New Holland T9020 better judged by PTO hp or drawbar hp?

The drawbar output is about 94.4% of PTO output, comparing 258.6 drawbar hp with 274 PTO hp. That helps separate pulling ability from PTO implement ability.

How big is the New Holland T9020 engine?

The engine displacement is 540 ci, close to the 520 ci benchmark average. It is close to the normal engine-size range for this horsepower class.

Is the New Holland T9020 engine stressed for its PTO horsepower?

The engine has about 2 cubic inches per PTO hp, using 540 ci and 274 PTO hp. That is a smaller-displacement, higher-output style result.

How much PTO horsepower per liter does the New Holland T9020 make?

The output density is about 30.8 PTO hp per liter, using 274 PTO hp and 8.9 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.

Official information note

Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official newholland.com website before buying parts, sizing implements or making repair decisions.