The New Holland 9384 tractor hydraulic capacity is 20 gal (reservoir) | 75.7 L, pump flow is 45 gpm | 170.3 lpm, and hydraulic pressure is 2250 psi | 155.1 bar.
New Holland 9384 Hydraulic Capacity & Flow Specs
| Hydraulic type | closed center |
|---|---|
| Hydraulic capacity | 20 gal (reservoir) | 75.7 L |
| Hydraulic pressure | 2250 psi | 155.1 bar |
| Pump flow | 45 gpm | 170.3 lpm |
| Steering flow | 27 gpm | 102.2 lpm |
| Hydraulic valves | 4 |
New Holland 9384 Hitch, Remote & Lift Specs
| Rear hitch type | IVN/III |
|---|---|
| Rear lift at 24 inches | 13000 lbs | 5896 kg |
| Drawbar category | Cat. 4 |
New Holland 9384 Useful Hydraulic Calculations
| Pump flow per gallon of hydraulic capacity | 2.2 gpm per gal |
|---|---|
| Hydraulic tank turnover estimate | about 0.4 minutes at rated pump flow |
| Steering flow vs pump flow | 60% of listed pump flow |
| Rear lift per pump gpm | 288.9 lb per gpm |
| Rear lift per hydraulic gallon | 650 lb per gal |
| Estimated hydraulic horsepower | about 59.1 hydraulic hp from listed pressure and pump flow |
| Pump flow per listed valve | 11.2 gpm per valve |
| Metric capacity vs pump flow | 75.7 L capacity with 45 gpm pump flow |
New Holland 9384 Hydraulic Comparison Charts
Hydraulic capacity comparison
Pump flow comparison
Hydraulic pressure comparison
Rear lift comparison
Valve / remote count comparison
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland 9384 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Articulated power steering |
|---|---|
| Brakes | Hydraulic disc brakes |
New Holland 9384 Hydraulic Capacity FAQ
Is the New Holland 9384 hydraulic capacity big or small for its size?
The New Holland 9384 lists 20 gal (reservoir) | 75.7 L of hydraulic capacity, which is below the 42 gal benchmark for this group. Real talk: that is not automatically bad, but it gives you less oil volume as a heat buffer during loader work, hydraulic motors or long remote use.
Will the New Holland 9384 hydraulics feel fast or slow?
The useful speed clue is 45 gpm | 170.3 lpm pump flow, close to the 50 gpm benchmark for this group. It should be normal for general tractor hydraulic work, assuming the pump and valves are healthy.
What does the New Holland 9384 hydraulic pressure tell you?
The pressure spec is 2250 psi | 155.1 bar, below the 3,100 psi benchmark. Pressure is the force side of hydraulics, so this matters more for lift and cylinder push than for speed.
What matters most for loader speed on the New Holland 9384?
On the New Holland 9384, 45 gpm | 170.3 lpm pump flow is around normal for loader/cylinder speed, 2,250 psi pressure affects force more than speed, and 13,000 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland 9384?
For implement matching, the useful checks are 45 gpm flow, 2,250 psi pressure, 13,000 lb listed lift, and 4 remote/valve listing. That combination is in the normal flow range for this size group, not a brute-force hydraulic setup compared with higher-pressure systems, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland 9384 rear lift capacity strong?
The listed lift figure is 13000 lbs | 5896 kg, below the 15,500 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the New Holland 9384 hydraulic remotes enough?
The New Holland 9384 lists 4 for valves/remotes. That is slightly under the 5 benchmark, but still a workable/normal remote count for many setups.
Will the New Holland 9384 hydraulics handle long hydraulic jobs?
The useful heat clues are 20 gal of hydraulic capacity, 45 gpm flow, 2,250 psi pressure, and about 59.1 hydraulic hp by the pressure-flow estimate. That is a high flow-to-oil-volume ratio, so heat and oil condition matter more during constant hydraulic work.
How much hydraulic power does the New Holland 9384 make on paper?
Using 2,250 psi and 45 gpm, the rough pressure-flow estimate is about 59.1 hydraulic hp. That is a serious hydraulic power figure for demanding hydraulic functions. It is a comparison number, not engine horsepower.
What do the New Holland 9384 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is IVN/III and listed lift is 13000 lbs | 5896 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
