The Massey Ferguson 820 dimensions found are: length is 109.5 inches | 278 cm, width is 55.1 inches | 139 cm, height is 61 inches | 154 cm, and wheelbase is 66.9 inches | 169 cm.
Length109.5 inches | 278 cm
Width55.1 inches | 139 cm
Height61 inches | 154 cm
Wheelbase66.9 inches | 169 cm
Massey Ferguson 820 Dimensions
Overall length
109.5 inches | 278 cm
Overall width
55.1 inches | 139 cm
Overall height
61 inches | 154 cm
Wheelbase
66.9 inches | 169 cm
Ground clearance
Frame: 18.5 inches | 46 cm
Front tread
44.5 to 68.5 inches | 113 to 173 cm
Rear tread
40.9 to 68.9 inches | 103 to 175 cm
Massey Ferguson 820 Weight
Weight
2204 lbs | 999 kg
Massey Ferguson 820 Tire Size Notes
Ag front
4.00-15
Ag rear
9-24 | 8-24
Massey Ferguson 820 Dimension Comparison Charts
Length comparison
This model
109.5 in
Average
115 in
Low
90 in
High
145 in
Width comparison
This model
55.1 in
Average
56 in
Low
42 in
High
72 in
Height comparison
This model
61 in
Average
86 in
Low
70 in
High
105 in
Wheelbase comparison
This model
66.9 in
Average
68 in
Low
55 in
High
84 in
Ground clearance comparison
This model
18.5 in
Average
12 in
Low
8 in
High
16 in
Weight comparison
This model
2,204 lbs
Average
2,200 lbs
Low
1,200 lbs
High
4,000 lbs
Floor space footprint
This model
42 sq ft
Average
45 sq ft
Low
26 sq ft
High
72 sq ft
Benchmarks use practical low, average and high dimension ranges for the compact tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Massey Ferguson 820 Extra Dimension Notes
Storage and fit note
Using the first listed dimension values, the Massey Ferguson 820 is about 109.5 inches | 278 cm long, about 55.1 inches | 139 cm wide, and about 61 inches | 154 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.
Massey Ferguson 820 Dimensions FAQ
Is the Massey Ferguson 820 a long tractor?
The Massey Ferguson 820 has an average listed length at 109.5 in, which is close to the 115 in benchmark average. It is not unusually short or unusually long for this size class.
Is the Massey Ferguson 820 narrow enough for tight storage?
The listed width is middle-of-the-pack at 55.1 in, which is close to the 56 in benchmark average. It is not especially narrow, but it is not unusually wide either.
Is the Massey Ferguson 820 tall for a shed or garage?
The listed height is low for the category at 61 in, which is below the 86 in benchmark average. That is better for low shed doors, but attachments and ROPS can still change the real clearance needed.
How much floor space does the Massey Ferguson 820 need?
The bare footprint is about 42 sq ft from a 9.1 ft length and 4.6 ft width. That is close to the 45 sq ft benchmark for this category.
Does the Massey Ferguson 820 have a short or long wheelbase?
The wheelbase is average for the category at 66.9 in, which is close to the 68 in benchmark average. It sits near the normal benchmark for this tractor size.
Does the Massey Ferguson 820 have good ground clearance?
The listed ground clearance is high for the category at 18.5 in, which is above the 12 in benchmark average. It has more underside clearance than the benchmark average.
Is the Massey Ferguson 820 heavy for its size?
The listed weight is average for the category at 2,204 lbs, which is close to the 2,200 lbs benchmark average. It sits near the normal benchmark before ballast, loader weight or implements are added.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official masseyferguson.com website before making shed, trailer, garage or transport decisions.
