The Massey Ferguson 6S.145 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 26.4 gpm (open) | 99.9 lpm, hydraulic pressure is 2900 psi | 200.0 bar, and hydraulic type is open center.
Massey Ferguson 6S.145 Hydraulic Capacity & Flow Specs
| Hydraulic type | open center |
|---|---|
| Hydraulic pressure | 2900 psi | 200.0 bar |
| Pump flow | 26.4 gpm (open) | 99.9 lpm |
| Rear remotes | up to 5 |
Massey Ferguson 6S.145 Hitch, Remote & Lift Specs
| Rear hitch type | III |
|---|---|
| Front lift | 7055 lbs | 3200 kg |
Massey Ferguson 6S.145 Useful Hydraulic Calculations
| Rear lift per pump gpm | 267.2 lb per gpm |
|---|---|
| Estimated hydraulic horsepower | about 44.7 hydraulic hp from listed pressure and pump flow |
Massey Ferguson 6S.145 Hydraulic Comparison Charts
Pump flow comparison
Hydraulic pressure comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Massey Ferguson 6S.145 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | Hydraulic wet disc brakes |
Massey Ferguson 6S.145 Hydraulic Capacity FAQ
Why is the Massey Ferguson 6S.145 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Massey Ferguson 6S.145, but pump flow is 26.4 gpm (open) | 99.9 lpm, pressure is 2900 psi | 200.0 bar, system type is open center, and lift is listed as 7055 lbs | 3200 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Massey Ferguson 6S.145 hydraulics feel fast or slow?
The useful speed clue is 26.4 gpm (open) | 99.9 lpm pump flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the Massey Ferguson 6S.145 hydraulic pressure tell you?
The pressure spec is 2900 psi | 200.0 bar, close to the 3,100 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Massey Ferguson 6S.145?
On the Massey Ferguson 6S.145, 26.4 gpm (open) | 99.9 lpm pump flow points to slower loader and cylinder movement, 2,900 psi pressure affects force more than speed, and 7,055 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 6S.145?
For implement matching, the useful checks are 26.4 gpm flow, 2,900 psi pressure, 7,055 lb listed lift, and up to 5 remote/valve listing. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, normal on pressure for the class, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 6S.145 rear lift capacity strong?
The listed lift figure is 7055 lbs | 3200 kg, below the 15,500 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the Massey Ferguson 6S.145 hydraulic remotes enough?
The Massey Ferguson 6S.145 remote/valve listing is up to 5. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Massey Ferguson 6S.145 hydraulics handle long hydraulic jobs?
The useful heat clues are 26.4 gpm flow, 2,900 psi pressure, and about 44.7 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the Massey Ferguson 6S.145 make on paper?
Using 2,900 psi and 26.4 gpm, the rough pressure-flow estimate is about 44.7 hydraulic hp. That is a serious hydraulic power figure for demanding hydraulic functions. It is a comparison number, not engine horsepower.
What do the Massey Ferguson 6S.145 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is III and listed lift is 7055 lbs | 3200 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
