The Massey Ferguson 5710S tractor primary air filter part number is 7068311M91. The inner safety filter is 4379575M1.
Massey Ferguson 5710S Air Filter Details
Primary air filter part number
7068311M91
Inner safety air filter part number
4379575M1
Outer air filter part number
4379574M1
Air Filter Service Interval Guide
Air Filter Service Interval Guide
Dusty use
100 hrs
Average
300 hrs
Light use
600 hrs
These are practical inspection/replacement guide ranges for the utility tractor category. Dusty work can shorten the interval heavily, so use the restriction indicator and operator manual first.
Massey Ferguson 5710S Extra Air Filter Notes
Engine displacement
4.4 L | 268.5 cu in
Engine horsepower
95 hp | 70.8 kW
Primary filter note
For the Massey Ferguson 5710S, the listed primary air filter part number is 7068311M91. Match the number before buying because air cleaner setups can vary by engine, serial range and market.
Outer filter note
The listed outer air filter part number is 4379574M1.
Safety filter note
The listed inner safety air filter is 4379575M1. Do not remove the safety element for normal cleaning; replace it if dirty, damaged or oil-soaked.
Fitment note
Check the old filter, air cleaner housing label and parts book before ordering if the tractor has had an engine or intake-housing change.
Power range note
At this power level, a dirty filter can show up as weaker pull, smoke or higher heat under load. Use job conditions and the restriction indicator ahead of a fixed schedule.
Engine airflow note
The displacement helps identify the engine family; horsepower tells you how hard it breathes under load. The element still has to match the canister.
Service note
Clean loose dust from the air cleaner housing before pulling the filter. Never run the tractor with the filter removed, even for a quick test.
Massey Ferguson 5710S Air Filter FAQs
What should I check before ordering a Massey Ferguson 5710S air filter?
If the old filter is missing, use 7068311M91 plus the housing measurements as a two-step check. If either the seal or cover depth is wrong, do not run it.
How do I avoid mixing up the Massey Ferguson 5710S air-filter elements?
For a full parts check, separate the service element from the safety element: buy the outer/primary service element first, then buy the inner safety element only if it is dirty, damaged or due. Do not accidentally order 4379574M1 when you meant the safety filter, or 4379575M1 when you meant the outer filter.
Why are there multiple air filter numbers for the Massey Ferguson 5710S?
The presence of both outer and inner numbers means you should order carefully. A kit can be convenient, but only if it contains the correct service element and safety element.
Can I ignore letters or suffixes in the Massey Ferguson 5710S filter number?
The main number 7068311M91 should be treated as the control number. The other numbers need their own fitment checks, not blind substitution.
Can the Massey Ferguson 5710S lose power from a dirty air filter?
At this power level, a dirty filter can show up as weaker pull, smoke or higher heat under load. Use job conditions and the restriction indicator ahead of a fixed schedule.
How does engine data help with a Massey Ferguson 5710S air-filter check?
The engine info narrows the search, but serial range and market version can still change the air-cleaner setup.
Should I replace the Massey Ferguson 5710S inner safety filter every time?
No. The inner safety element is backup protection, not the part to disturb every time. Leave it seated while the outer element is out so dust cannot fall into the intake.
Official information note
Mistakes do happen. Air filter specs can change by year, engine, serial range, market and air cleaner housing. Check the old filter, operator manual, parts book and official masseyferguson.com website before ordering or installing an air filter.
