The Massey Ferguson 5710M tractor primary air filter part number is 7068311M91. The inner safety filter is 4379575M1.
Massey Ferguson 5710M Air Filter Details
Primary air filter part number
7068311M91
Inner safety air filter part number
4379575M1
Outer air filter part number
4379574M1
Air Filter Service Interval Guide
Air Filter Service Interval Guide
Dusty use
100 hrs
Average
300 hrs
Light use
600 hrs
These are practical inspection/replacement guide ranges for the utility tractor category. Dusty work can shorten the interval heavily, so use the restriction indicator and operator manual first.
Massey Ferguson 5710M Extra Air Filter Notes
Engine displacement
4.4 L | 268.5 cu in
Engine horsepower
100 hp | 74.6 kW
Primary filter note
For the Massey Ferguson 5710M, the listed primary air filter part number is 7068311M91. Match the number before buying because air cleaner setups can vary by engine, serial range and market.
Outer filter note
The listed outer air filter part number is 4379574M1.
Safety filter note
The listed inner safety air filter is 4379575M1. Do not remove the safety element for normal cleaning; replace it if dirty, damaged or oil-soaked.
Fitment note
Check the old filter, air cleaner housing label and parts book before ordering if the tractor has had an engine or intake-housing change.
Power range note
At this power level, a dirty filter can show up as weaker pull, smoke or higher heat under load. Use job conditions and the restriction indicator ahead of a fixed schedule.
Engine airflow note
Engine size is useful context for service urgency, not a license to ignore the part number. The canister and seal decide fitment.
Service note
Clean loose dust from the air cleaner housing before pulling the filter. Never run the tractor with the filter removed, even for a quick test.
Massey Ferguson 5710M Air Filter FAQs
Which Massey Ferguson 5710M air-filter parts should be changed together?
For a full parts check, separate the service element from the safety element: buy the outer/primary service element first, then buy the inner safety element only if it is dirty, damaged or due. Do not accidentally order 4379574M1 when you meant the safety filter, or 4379575M1 when you meant the outer filter.
How should I verify the Massey Ferguson 5710M air filter before fitting it?
If the old filter is missing, use 7068311M91 plus the housing measurements as a two-step check. If either the seal or cover depth is wrong, do not run it.
Can a similar Massey Ferguson 5710M air-filter number still be wrong?
Multiple numbers are useful only if each one is tied to the correct element position. Wrong element in the right brand is still wrong.
Does engine power change how I service the Massey Ferguson 5710M air filter?
At this power level, a dirty filter can show up as weaker pull, smoke or higher heat under load. Use job conditions and the restriction indicator ahead of a fixed schedule.
How do I avoid mixing up Massey Ferguson 5710M outer and safety filters?
Multiple numbers usually means a staged air cleaner. Replace the loaded outer element first, then inspect the safety element without exposing the clean intake to dust.
Can I clean the Massey Ferguson 5710M inner safety filter?
Do not treat the safety filter like a second primary filter. It should stay protected; once it is dirty, replace it instead of trying to revive it with air pressure.
Should the Massey Ferguson 5710M engine family be checked before ordering?
The engine clue is helpful, but the filter still has to seal in the actual housing. Fit beats theory here.
Official information note
Mistakes do happen. Air filter specs can change by year, engine, serial range, market and air cleaner housing. Check the old filter, operator manual, parts book and official masseyferguson.com website before ordering or installing an air filter.
