The Massey Ferguson 5480 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic type is open center.
Massey Ferguson 5480 Hydraulic Capacity & Flow Specs
| Hydraulic type | open center |
|---|---|
| Optional pump flow | 15 gpm (open center) | 56.8 lpm | 26 gpm (open- Optional) | 98.4 lpm |
Massey Ferguson 5480 Hitch, Remote & Lift Specs
| Rear hitch type | III/II |
|---|---|
| Rear hitch control | electronic draft sensing |
| Rear lift at 24 inches | 9189 lbs | 4168 kg |
Massey Ferguson 5480 Hydraulic Comparison Charts
Rear lift comparison
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Massey Ferguson 5480 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | Hydraulic wet disc brakes |
| Trailer brakes | hydraulic Optional |
| Differential lock | electro-hydraulic rear |
Massey Ferguson 5480 Hydraulic Capacity FAQ
Why is the Massey Ferguson 5480 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Massey Ferguson 5480, but system type is open center and lift is listed as 9189 lbs | 4168 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
What matters most for loader speed on the Massey Ferguson 5480?
On the Massey Ferguson 5480, pump/remote flow is not listed here, so loader speed cannot be judged from this page alone and 9,189 lb listed lift is the number to watch for implement weight. You need the pump-flow or remote-flow spec to judge speed; pressure and lift only tell you force/capacity.
How do you judge hydraulic implement fit on the Massey Ferguson 5480?
For implement matching, the useful checks are 9,189 lb listed lift and III/II hitch. That combination is best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 5480 rear lift capacity strong?
The listed lift figure is 9189 lbs | 4168 kg, below the 15,500 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
What do the Massey Ferguson 5480 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is III/II, hitch control is electronic draft sensing, and listed lift is 9189 lbs | 4168 kg. Hitch category gets the implement connected and lift capacity gets it raised; pump flow still needs checking separately if cylinder speed matters.
What hydraulic system does the Massey Ferguson 5480 use?
The hydraulic system is listed as open center. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the Massey Ferguson 5480 hydraulics?
For service planning, the system is listed as open center. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
