Benchmarks use practical low, average and high ranges for the utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Massey Ferguson 5470SA Horsepower FAQ
How much horsepower does the Massey Ferguson 5470SA have?
The listed engine output is 115 hp, above the 80 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 115 hp.
How much PTO horsepower does the Massey Ferguson 5470SA have?
The listed PTO output is 95 hp, above the 65 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 95 hp.
How much engine power reaches the PTO on the Massey Ferguson 5470SA?
The PTO-to-engine transfer works out to 82.6%, from 115 engine hp to 95 PTO hp. That is a normal usable range for judging PTO implement fit.
How big is the Massey Ferguson 5470SA engine?
The engine displacement is 268.5 ci, close to the 260 ci benchmark average. It is close to the normal engine-size range for this horsepower class.
Is the Massey Ferguson 5470SA engine stressed for its PTO horsepower?
The engine has about 2.8 cubic inches per PTO hp, using 268.5 ci and 95 PTO hp. That is a smaller-displacement, higher-output style result.
How much PTO horsepower per liter does the Massey Ferguson 5470SA make?
The output density is about 21.6 PTO hp per liter, using 95 PTO hp and 4.4 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
What rpm is the Massey Ferguson 5470SA rated at?
The rated speed is 2,200 rpm, close to the 2,200 rpm benchmark average. The 2,200 rpm figure is around normal for this class.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official masseyferguson.com website before buying parts, sizing implements or making repair decisions.
