Benchmarks use practical low, average and high ranges for the utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Massey Ferguson 4607M Horsepower FAQ
How much horsepower does the Massey Ferguson 4607M have?
The listed engine output is 70.1 hp, below the 80 hp benchmark average. That is a lower-power result, so the smarter match is lighter implements and jobs that do not demand more than about 70.1 hp.
How much PTO horsepower does the Massey Ferguson 4607M have?
The listed PTO output is 56 hp, below the 65 hp benchmark average. For real use, size PTO implements below or near 56 hp rather than using a bigger engine-horsepower number.
How much engine power reaches the PTO on the Massey Ferguson 4607M?
The PTO-to-engine transfer works out to 79.9%, from 70.1 engine hp to 56 PTO hp. That is a normal usable range for judging PTO implement fit.
How big is the Massey Ferguson 4607M engine?
The engine displacement is 201 ci, below the 260 ci benchmark average. Smaller displacement usually means less engine size behind each horsepower number.
Is the Massey Ferguson 4607M engine stressed for its PTO horsepower?
The engine has about 3.6 cubic inches per PTO hp, using 201 ci and 56 PTO hp. That is close to the normal benchmark for this category.
How much PTO horsepower per liter does the Massey Ferguson 4607M make?
The output density is about 17 PTO hp per liter, using 56 PTO hp and 3.3 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
What rpm is the Massey Ferguson 4607M rated at?
The rated speed is 2,200 rpm, close to the 2,200 rpm benchmark average. The 2,200 rpm figure is around normal for this class.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official masseyferguson.com website before buying parts, sizing implements or making repair decisions.
