The Massey Ferguson 396 dimensions found are: length is 163.4 inches | 415 cm, width is 87.2 inches | 221 cm, height is 101 inches | 256 cm, and wheelbase is 101.4 inches | 257 cm.
Length163.4 inches | 415 cm
Width87.2 inches | 221 cm
Height101 inches | 256 cm
Wheelbase101.4 inches | 257 cm
Massey Ferguson 396 Dimensions
Overall length
2WD: 163.4 inches | 415 cm | 4WD: 169.1 inches | 429 cm
Overall width
87.2 inches | 221 cm
Overall height
ROPS: 101 inches | 256 cm | Cab: 107.5 inches | 273 cm
Wheelbase
2WD: 101.4 inches | 257 cm | 4WD: 103.7 inches | 263 cm
Massey Ferguson 396 Weight
2WD ROPS
7180 lbs | 3256 kg
4WD ROPS
7690 lbs | 3488 kg
2WD Cab
7831 lbs | 3552 kg
4WD Cab
8340 lbs | 3783 kg
Massey Ferguson 396 Tire Size Notes
Ag front
10.00-16
Ag rear
18.4-34
Massey Ferguson 396 Dimension Comparison Charts
Length comparison
This model
163.4 in
Average
190 in
Low
155 in
High
240 in
Width comparison
This model
87.2 in
Average
96 in
Low
78 in
High
120 in
Height comparison
This model
101 in
Average
125 in
Low
105 in
High
150 in
Wheelbase comparison
This model
101.4 in
Average
115 in
Low
95 in
High
145 in
Floor space footprint
This model
99 sq ft
Average
130 sq ft
Low
90 sq ft
High
200 sq ft
Benchmarks use practical low, average and high dimension ranges for the large ag tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Massey Ferguson 396 Extra Dimension Notes
Storage and fit note
Using the first listed dimension values, the Massey Ferguson 396 is about 163.4 inches | 415 cm long, about 87.2 inches | 221 cm wide, and about 101 inches | 256 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.
Massey Ferguson 396 Dimensions FAQ
Is the Massey Ferguson 396 a long tractor?
The Massey Ferguson 396 is on the shorter side at 163.4 in, which is below the 190 in benchmark average. That makes its listed length easier to fit than many tractors in the same large ag tractor range.
Is the Massey Ferguson 396 narrow enough for tight storage?
The listed width is middle-of-the-pack at 87.2 in, which is close to the 96 in benchmark average. It is not especially narrow, but it is not unusually wide either.
Is the Massey Ferguson 396 tall for a shed or garage?
The listed height is low for the category at 101 in, which is below the 125 in benchmark average. That is better for low shed doors, but attachments and ROPS can still change the real clearance needed.
How much floor space does the Massey Ferguson 396 need?
The bare footprint is about 99 sq ft from a 13.6 ft length and 7.3 ft width. That is below the 130 sq ft benchmark for this category.
Does the Massey Ferguson 396 have a short or long wheelbase?
The wheelbase is average for the category at 101.4 in, which is close to the 115 in benchmark average. It sits near the normal benchmark for this tractor size.
Will the Massey Ferguson 396 fit easily in storage?
The fit numbers are fairly normal for the category: length 163.4 in, width 87.2 in and height 101 in. It should be judged as an average-size tractor for its benchmark group, not a tiny one.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official masseyferguson.com website before making shed, trailer, garage or transport decisions.
