Massey Ferguson 354S Fuel, Cooling, Starting & Service Specs
Starter volts
12
Battery volts
12
Massey Ferguson 354S Horsepower Comparison Charts
PTO horsepower comparison
This model
42 hp
Average
28 hp
Low
12 hp
High
50 hp
Displacement comparison
This model
152 ci
Average
110 ci
Low
50 ci
High
180 ci
Rated RPM comparison
This model
2,250 rpm
Average
2,400 rpm
Low
1,800 rpm
High
3,000 rpm
Engine size per PTO HP
This model
3.6 ci/hp
Average
3.1 ci/hp
Low
1.8 ci/hp
High
5 ci/hp
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Massey Ferguson 354S Horsepower FAQ
How much PTO horsepower does the Massey Ferguson 354S have?
The listed PTO output is 42 hp, above the 28 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 42 hp.
How big is the Massey Ferguson 354S engine?
The engine displacement is 152 ci, above the 110 ci benchmark average. Bigger displacement can help low-rpm pull and load-holding feel.
Is the Massey Ferguson 354S engine stressed for its PTO horsepower?
The engine has about 3.6 cubic inches per PTO hp, using 152 ci and 42 PTO hp. That points to a larger-displacement, lower-stress style setup.
How much PTO horsepower per liter does the Massey Ferguson 354S make?
The output density is about 16.8 PTO hp per liter, using 42 PTO hp and 2.5 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
What rpm is the Massey Ferguson 354S rated at?
The rated speed is 2,250 rpm, close to the 2,400 rpm benchmark average. The 2,250 rpm figure is around normal for this class.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official masseyferguson.com website before buying parts, sizing implements or making repair decisions.
