The Massey Ferguson 350 tractor hydraulic capacity is 12.5 gal | 47.3 L, pump flow is 9.2 gpm (aux pump) | 34.8 lpm, and hydraulic pressure is 3000 psi | 206.8 bar.
Hydraulic Capacity12.5 gal | 47.3 L
Hydraulic Flow9.2 gpm (aux pump) | 34.8 lpm
Pressure3000 psi | 206.8 bar
Hydraulic Typeopen center
Lift Capacity4729 lbs * Capacity with links horizontal 2145 kg
about 16.1 hydraulic hp from listed pressure and pump flow
Metric capacity vs pump flow
47.3 L capacity with 9.2 gpm pump flow
Massey Ferguson 350 Hydraulic Comparison Charts
Hydraulic capacity comparison
This model
12.5 gal
Average
18 gal
Low
8 gal
High
32 gal
Pump flow comparison
This model
9.2 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Hydraulic pressure comparison
This model
3,000 psi
Average
2,600 psi
Low
2,100 psi
High
3,200 psi
Rear lift comparison
This model
4,729 lb
Average
7,000 lb
Low
3,000 lb
High
12,000 lb
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Is the Massey Ferguson 350 hydraulic capacity big or small for its size?
The Massey Ferguson 350 lists 12.5 gal | 47.3 L of hydraulic capacity, which is below the 18 gal benchmark for this group. Real talk: that is not automatically bad, but it gives you less oil volume as a heat buffer during loader work, hydraulic motors or long remote use.
Will the Massey Ferguson 350 hydraulics feel fast or slow?
The useful speed clue is 9.2 gpm (aux pump) | 34.8 lpm pump flow, below the 14 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the Massey Ferguson 350 hydraulic pressure tell you?
The pressure spec is 3000 psi | 206.8 bar, above the 2,600 psi benchmark. That gives the system stronger force potential, but the implement, hoses, couplers and relief settings still have to match.
What matters most for loader speed on the Massey Ferguson 350?
On the Massey Ferguson 350, 9.2 gpm (aux pump) | 34.8 lpm pump flow points to slower loader and cylinder movement, 3,000 psi pressure affects force more than speed, and 4,729 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 350?
For implement matching, the useful checks are 9.2 gpm flow, 3,000 psi pressure, 4,729 lb listed lift, and II/I hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, strong on hydraulic force if the cylinders and relief settings match, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 350 rear lift capacity strong?
The listed lift figure is 4729 lbs * Capacity with links horizontal 2145 kg, below the 7,000 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Will the Massey Ferguson 350 hydraulics handle long hydraulic jobs?
The useful heat clues are 12.5 gal of hydraulic capacity, 9.2 gpm flow, 3,000 psi pressure, and about 16.1 hydraulic hp by the pressure-flow estimate. That is a fairly normal flow-to-oil-volume relationship for mixed tractor work.
How much hydraulic power does the Massey Ferguson 350 make on paper?
Using 3,000 psi and 9.2 gpm, the rough pressure-flow estimate is about 16.1 hydraulic hp. That is a useful middle-range hydraulic power figure for normal tractor work. It is a comparison number, not engine horsepower.
What do the Massey Ferguson 350 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II/I, hitch control is position and draft control, and listed lift is 4729 lbs * Capacity with links horizontal 2145 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the Massey Ferguson 350 use?
The hydraulic system is listed as open center with 9.2 gpm (aux pump) | 34.8 lpm pump flow and 3000 psi | 206.8 bar pressure. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
