The Massey Ferguson 2680 HD tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 7.0 gpm (3-point) | 26.5 lpm, hydraulic type is open center, and valves/remotes are listed as 1 to 3.
Hydraulic Flow7.0 gpm (3-point) | 26.5 lpm
Hydraulic Typeopen center
Valves / Remotes1 to 3
Lift Capacity3,682 lbs | 1670 kg
Massey Ferguson 2680 HD Hydraulic Capacity & Flow Specs
Hydraulic type
open center
Pump flow
7.0 gpm (3-point) | 26.5 lpm
Total hydraulic flow
25 gpm | 94.6 lpm
Steering flow
8 gpm | 30.3 lpm
SCV flow
17 gpm | 64.3 lpm
Hydraulic valves
1 to 3
Massey Ferguson 2680 HD Hitch, Remote & Lift Specs
Rear hitch type
II
Rear lift at 24 inches
3,682 lbs | 1670 kg
Drawbar category
swinging drawbar with hammer strap
Massey Ferguson 2680 HD Useful Hydraulic Calculations
Total flow vs pump flow
357.1% of listed pump flow
SCV flow vs pump flow
242.9% of listed pump flow
Steering flow vs pump flow
114.3% of listed pump flow
Rear lift per pump gpm
526 lb per gpm
Massey Ferguson 2680 HD Hydraulic Comparison Charts
Pump flow comparison
This model
7 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Rear lift comparison
This model
3,682 lb
Average
7,000 lb
Low
3,000 lb
High
12,000 lb
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Massey Ferguson 2680 HD Steering, Brakes & Mechanical Hydraulic Notes
Steering
Power steering
Brakes
Hydraulic wet disc brakes
Differential lock
mechanical rear lock standard
Massey Ferguson 2680 HD Hydraulic Capacity FAQ
Why is the Massey Ferguson 2680 HD hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Massey Ferguson 2680 HD, but pump flow is 7.0 gpm (3-point) | 26.5 lpm, system type is open center, and lift is listed as 3,682 lbs | 1670 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Massey Ferguson 2680 HD hydraulics feel fast or slow?
The useful speed clue is 7.0 gpm (3-point) | 26.5 lpm pump flow, below the 14 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What matters most for loader speed on the Massey Ferguson 2680 HD?
On the Massey Ferguson 2680 HD, 7.0 gpm (3-point) | 26.5 lpm pump flow points to slower loader and cylinder movement and 3,682 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 2680 HD?
For implement matching, the useful checks are 7 gpm flow, 3,682 lb listed lift, 1 to 3 remote/valve listing, and II hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 2680 HD rear lift capacity strong?
The listed lift figure is 3,682 lbs | 1670 kg, below the 7,000 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the Massey Ferguson 2680 HD hydraulic remotes enough?
The Massey Ferguson 2680 HD remote/valve listing is 1 to 3. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Massey Ferguson 2680 HD hydraulics handle long hydraulic jobs?
The useful heat clues are 7 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What do the Massey Ferguson 2680 HD hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II and listed lift is 3,682 lbs | 1670 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the Massey Ferguson 2680 HD use?
The hydraulic system is listed as open center with 7.0 gpm (3-point) | 26.5 lpm pump flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the Massey Ferguson 2680 HD hydraulics?
For service planning, the system is listed as open center and flow is listed at 7 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
