Massey Ferguson 2605 Fuel, Cooling, Starting & Service Specs
Starter volts
12
Battery volts
12
Firing order
1-2-3
Massey Ferguson 2605 Horsepower Comparison Charts
Engine horsepower comparison
This model
38 hp
Average
35 hp
Low
15 hp
High
60 hp
PTO horsepower comparison
This model
32 hp
Average
28 hp
Low
12 hp
High
50 hp
Displacement comparison
This model
152.6 ci
Average
110 ci
Low
50 ci
High
180 ci
Torque comparison
This model
109 lb-ft
Average
95 lb-ft
Low
45 lb-ft
High
170 lb-ft
Rated RPM comparison
This model
2,000 rpm
Average
2,400 rpm
Low
1,800 rpm
High
3,000 rpm
Engine size per PTO HP
This model
4.8 ci/hp
Average
3.1 ci/hp
Low
1.8 ci/hp
High
5 ci/hp
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Massey Ferguson 2605 Horsepower FAQ
How much horsepower does the Massey Ferguson 2605 have?
The listed engine output is 38 hp, close to the 35 hp benchmark average. That puts the tractor in a normal working range for this benchmark group, with 38 hp as the main engine number.
How much PTO horsepower does the Massey Ferguson 2605 have?
The listed PTO output is 32 hp, above the 28 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 32 hp.
How much engine power reaches the PTO on the Massey Ferguson 2605?
The PTO-to-engine transfer works out to 84.2%, from 38 engine hp to 32 PTO hp. That is a normal usable range for judging PTO implement fit.
How big is the Massey Ferguson 2605 engine?
The engine displacement is 152.6 ci, above the 110 ci benchmark average. Bigger displacement can help low-rpm pull and load-holding feel.
Is the Massey Ferguson 2605 engine stressed for its PTO horsepower?
The engine has about 4.8 cubic inches per PTO hp, using 152.6 ci and 32 PTO hp. That points to a larger-displacement, lower-stress style setup.
How much PTO horsepower per liter does the Massey Ferguson 2605 make?
The output density is about 12.8 PTO hp per liter, using 32 PTO hp and 2.5 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
How much torque does the Massey Ferguson 2605 have?
The listed torque is 109 lb-ft, above the 95 lb-ft benchmark average. The 109 lb-ft figure is useful for lugging, loader work and heavy PTO load recovery.
Does the Massey Ferguson 2605 have good torque for its PTO horsepower?
The torque-to-PTO-power figure is about 3.4 lb-ft per PTO hp, using 109 lb-ft and 32 PTO hp. A higher number usually points to a slower, gruntier working feel.
What rpm is the Massey Ferguson 2605 rated at?
The rated speed is 2,000 rpm, below the 2,400 rpm benchmark average. A lower 2,000 rpm rating can feel more relaxed, but torque and gearing decide the real work feel.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official masseyferguson.com website before buying parts, sizing implements or making repair decisions.
