The Massey Ferguson 1E.35 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 7.6 gpm | 28.8 lpm, and hydraulic type is open center.
Massey Ferguson 1E.35 Hydraulic Capacity & Flow Specs
| Hydraulic type | open center |
|---|---|
| Pump flow | 7.6 gpm | 28.8 lpm |
| Steering flow | 3.8 gpm | 14.4 lpm |
Massey Ferguson 1E.35 Hitch, Remote & Lift Specs
| Rear hitch type | I |
|---|---|
| Rear lift at ends | 2205 lbs | 1000 kg |
| Rear lift at 24 inches | 1598 lbs | 724 kg |
Massey Ferguson 1E.35 Useful Hydraulic Calculations
| Steering flow vs pump flow | 50% of listed pump flow |
|---|---|
| Rear lift per pump gpm | 210.3 lb per gpm |
Massey Ferguson 1E.35 Hydraulic Comparison Charts
Pump flow comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Massey Ferguson 1E.35 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|
Massey Ferguson 1E.35 Hydraulic Capacity FAQ
Why is the Massey Ferguson 1E.35 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Massey Ferguson 1E.35, but pump flow is 7.6 gpm | 28.8 lpm, system type is open center, and lift is listed as 1598 lbs | 724 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Massey Ferguson 1E.35 hydraulics feel fast or slow?
The useful speed clue is 7.6 gpm | 28.8 lpm pump flow, close to the 8 gpm benchmark for this group. It should be normal for general tractor hydraulic work, assuming the pump and valves are healthy.
What matters most for loader speed on the Massey Ferguson 1E.35?
On the Massey Ferguson 1E.35, 7.6 gpm | 28.8 lpm pump flow is around normal for loader/cylinder speed and 1,598 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 1E.35?
For implement matching, the useful checks are 7.6 gpm flow, 1,598 lb listed lift, and I hitch. That combination is in the normal flow range for this size group, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 1E.35 rear lift capacity strong?
The listed lift figure is 1598 lbs | 724 kg, close to the 1,800 lb benchmark. It is in the normal range, so implement length and ballast matter as much as the headline lift number.
Will the Massey Ferguson 1E.35 hydraulics handle long hydraulic jobs?
The useful heat clues are 7.6 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What do the Massey Ferguson 1E.35 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is I and listed lift is 1598 lbs | 724 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the Massey Ferguson 1E.35 use?
The hydraulic system is listed as open center with 7.6 gpm | 28.8 lpm pump flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the Massey Ferguson 1E.35 hydraulics?
For service planning, the system is listed as open center and flow is listed at 7.6 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
