The Case IH Vestrum 120 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 29.1 gpm | 110.1 lpm, hydraulic pressure is 2900 psi | 200.0 bar, and hydraulic type is closed center load-sensing.
Case IH Vestrum 120 Hydraulic Capacity & Flow Specs
| Hydraulic type | closed center load-sensing |
|---|---|
| Hydraulic pressure | 2900 psi | 200.0 bar |
| Pump flow | 29.1 gpm | 110.1 lpm |
| Rear remotes | 4 Optional |
Case IH Vestrum 120 Hitch, Remote & Lift Specs
| Rear hitch type | II |
|---|---|
| Rear hitch control | electronic lower-link draft sensing |
| Rear lift at 24 inches | 9259 lbs | 4199 kg |
Case IH Vestrum 120 Useful Hydraulic Calculations
| Rear lift per pump gpm | 318.2 lb per gpm |
|---|---|
| Estimated hydraulic horsepower | about 49.2 hydraulic hp from listed pressure and pump flow |
Case IH Vestrum 120 Hydraulic Comparison Charts
Pump flow comparison
Hydraulic pressure comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH Vestrum 120 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | Hydraulic wet disc brakes |
| Differential lock | electro-hydraulic rear |
Case IH Vestrum 120 Hydraulic Capacity FAQ
Why is the Case IH Vestrum 120 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH Vestrum 120, but pump flow is 29.1 gpm | 110.1 lpm, pressure is 2900 psi | 200.0 bar, system type is closed center load-sensing, and lift is listed as 9259 lbs | 4199 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH Vestrum 120 hydraulics feel fast or slow?
The useful speed clue is 29.1 gpm | 110.1 lpm pump flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What does the Case IH Vestrum 120 hydraulic pressure tell you?
The pressure spec is 2900 psi | 200.0 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Case IH Vestrum 120?
On the Case IH Vestrum 120, 29.1 gpm | 110.1 lpm pump flow points to quicker loader and cylinder movement, 2,900 psi pressure affects force more than speed, and 9,259 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH Vestrum 120?
For implement matching, the useful checks are 29.1 gpm flow, 2,900 psi pressure, 9,259 lb listed lift, and 4 Optional remote/valve listing. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group, normal on pressure for the class, and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH Vestrum 120 rear lift capacity strong?
The listed lift figure is 9259 lbs | 4199 kg, above the 7,000 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Are the Case IH Vestrum 120 hydraulic remotes enough?
The Case IH Vestrum 120 remote/valve listing is 4 Optional. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Case IH Vestrum 120 hydraulics handle long hydraulic jobs?
The useful heat clues are 29.1 gpm flow, 2,900 psi pressure, and about 49.2 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the Case IH Vestrum 120 make on paper?
Using 2,900 psi and 29.1 gpm, the rough pressure-flow estimate is about 49.2 hydraulic hp. That is a serious hydraulic power figure for demanding hydraulic functions. It is a comparison number, not engine horsepower.
What do the Case IH Vestrum 120 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II, hitch control is electronic lower-link draft sensing, and listed lift is 9259 lbs | 4199 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
