The Massey Ferguson 1155 tractor hydraulic capacity is 22 gal | 83.3 L, pump flow is 20 gpm | 75.7 lpm, and hydraulic pressure is 2100 psi | 144.8 bar.
about 24.5 hydraulic hp from listed pressure and pump flow
Metric capacity vs pump flow
83.3 L capacity with 20 gpm pump flow
Massey Ferguson 1155 Hydraulic Comparison Charts
Hydraulic capacity comparison
This model
22 gal
Average
42 gal
Low
22 gal
High
80 gal
Pump flow comparison
This model
20 gpm
Average
50 gpm
Low
25 gpm
High
90 gpm
Hydraulic pressure comparison
This model
2,100 psi
Average
3,100 psi
Low
2,600 psi
High
3,700 psi
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Is the Massey Ferguson 1155 hydraulic capacity big or small for its size?
The Massey Ferguson 1155 lists 22 gal | 83.3 L of hydraulic capacity, which is below the 42 gal benchmark for this group. Real talk: that is not automatically bad, but it gives you less oil volume as a heat buffer during loader work, hydraulic motors or long remote use.
Will the Massey Ferguson 1155 hydraulics feel fast or slow?
The useful speed clue is 20 gpm | 75.7 lpm pump flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the Massey Ferguson 1155 hydraulic pressure tell you?
The pressure spec is 2100 psi | 144.8 bar, below the 3,100 psi benchmark. Pressure is the force side of hydraulics, so this matters more for lift and cylinder push than for speed.
What matters most for loader speed on the Massey Ferguson 1155?
On the Massey Ferguson 1155, 20 gpm | 75.7 lpm pump flow points to slower loader and cylinder movement and 2,100 psi pressure affects force more than speed. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 1155?
For implement matching, the useful checks are 20 gpm flow, 2,100 psi pressure, and II/III hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, not a brute-force hydraulic setup compared with higher-pressure systems, and has less oil volume to absorb heat during long hydraulic jobs, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Will the Massey Ferguson 1155 hydraulics handle long hydraulic jobs?
The useful heat clues are 22 gal of hydraulic capacity, 20 gpm flow, 2,100 psi pressure, and about 24.5 hydraulic hp by the pressure-flow estimate. That is a fairly normal flow-to-oil-volume relationship for mixed tractor work.
How much hydraulic power does the Massey Ferguson 1155 make on paper?
Using 2,100 psi and 20 gpm, the rough pressure-flow estimate is about 24.5 hydraulic hp. That is a useful middle-range hydraulic power figure for normal tractor work. It is a comparison number, not engine horsepower.
What do the Massey Ferguson 1155 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II/III and hitch control is position and draft control. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the Massey Ferguson 1155 use?
The hydraulic system is listed as closed center with 20 gpm | 75.7 lpm pump flow and 2100 psi | 144.8 bar pressure. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the Massey Ferguson 1155 hydraulics?
For service planning, the oil-volume figure is 22 gal | 83.3 L, the system is listed as closed center, pressure is listed at 2,100 psi, and flow is listed at 20 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
