The Massey Ferguson 1095 dimensions found are: length is 143.7 inches | 364 cm, width is 82.3 inches | 209 cm, height is 70.9 inches | 180 cm, and wheelbase is 96.5 inches | 245 cm.
Length143.7 inches | 364 cm
Width82.3 inches | 209 cm
Height70.9 inches | 180 cm
Wheelbase96.5 inches | 245 cm
Massey Ferguson 1095 Dimensions
Overall length
143.7 inches | 364 cm
Overall width
82.3 inches | 209 cm
Overall height
Steering wheel: 70.9 inches | 180 cm
Wheelbase
96.5 inches | 245 cm
Ground clearance
Frame: 21.7 inches | 55 cm
Massey Ferguson 1095 Weight
Weight
11964 lbs | 5426 kg
Massey Ferguson 1095 Tire Size Notes
Ag front
7.50×18 | 11.0×16
Ag rear
18.4-34 | 24.5-32
Massey Ferguson 1095 Dimension Comparison Charts
Length comparison
This model
143.7 in
Average
145 in
Low
120 in
High
175 in
Width comparison
This model
82.3 in
Average
74 in
Low
60 in
High
90 in
Height comparison
This model
70.9 in
Average
100 in
Low
86 in
High
120 in
Wheelbase comparison
This model
96.5 in
Average
86 in
Low
70 in
High
105 in
Ground clearance comparison
This model
21.7 in
Average
15 in
Low
10 in
High
21 in
Weight comparison
This model
11,964 lbs
Average
5,500 lbs
Low
3,500 lbs
High
8,000 lbs
Floor space footprint
This model
82 sq ft
Average
75 sq ft
Low
50 sq ft
High
110 sq ft
Benchmarks use practical low, average and high dimension ranges for the utility tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Massey Ferguson 1095 Extra Dimension Notes
Storage and fit note
Using the first listed dimension values, the Massey Ferguson 1095 is about 143.7 inches | 364 cm long, about 82.3 inches | 209 cm wide, and about 70.9 inches | 180 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.
Massey Ferguson 1095 Dimensions FAQ
Is the Massey Ferguson 1095 a long tractor?
The Massey Ferguson 1095 has an average listed length at 143.7 in, which is close to the 145 in benchmark average. It is not unusually short or unusually long for this size class.
Is the Massey Ferguson 1095 narrow enough for tight storage?
The listed width is middle-of-the-pack at 82.3 in, which is close to the 74 in benchmark average. It is not especially narrow, but it is not unusually wide either.
Is the Massey Ferguson 1095 tall for a shed or garage?
The listed height is low for the category at 70.9 in, which is below the 100 in benchmark average. That is better for low shed doors, but attachments and ROPS can still change the real clearance needed.
How much floor space does the Massey Ferguson 1095 need?
The bare footprint is about 82 sq ft from a 12 ft length and 6.9 ft width. That is close to the 75 sq ft benchmark for this category.
Does the Massey Ferguson 1095 have a short or long wheelbase?
The wheelbase is long for the category at 96.5 in, which is above the 86 in benchmark average. That points to a longer chassis stance.
Does the Massey Ferguson 1095 have good ground clearance?
The listed ground clearance is high for the category at 21.7 in, which is above the 15 in benchmark average. It has more underside clearance than the benchmark average.
Is the Massey Ferguson 1095 heavy for its size?
The listed weight is heavy for the category at 11,964 lbs, which is above the 5,500 lbs benchmark average. Plan trailer, shed floor and transport decisions around the real operating setup, not just the bare spec.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official masseyferguson.com website before making shed, trailer, garage or transport decisions.
