The Kubota Z125S coolant capacity is listed as 0.63 gal (2.4 L). It also lists coolant type ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible and antifreeze mix 50/50 coolant and water mix.
Kubota Z125S Coolant Capacity
| Coolant capacity | 0.63 gal (2.4 L) |
|---|---|
| Coolant type | ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible |
| Antifreeze mix | 50/50 coolant and water mix |
| Engine horsepower | 25 hp (18.6 kW) |
| Engine displacement | 1.9 L (115.9 cu in) |
Coolant Capacity Comparison Chart
Coolant capacity comparison
Engine horsepower comparison
Engine displacement comparison
Kubota Z125S Coolant and Engine Notes
| Coolant capacity note | For the Kubota Z125S, 0.63 gal (2.4 L) is the main coolant capacity captured. Use it as a refill planning number, then confirm the final level at the machine |
|---|---|
| Coolant type note | For the Kubota Z125S, coolant type matters as much as capacity. The clean captured value is ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible |
| Antifreeze mix note | The Kubota Z125S antifreeze mix is listed as 50/50 coolant and water mix. That is the normal protection range for freezing, boiling and corrosion control |
| Engine context note | For the Kubota Z125S, the supporting engine specs are engine horsepower 25 hp (18.6 kW) and displacement 1.9 L (115.9 cu in). Use them as context beside the coolant capacity, not as a replacement for the manual |
| Refill note | The practical service move for the Kubota Z125S: buy enough coolant for 0.63 gal (2.4 L), fill to spec, run the engine, then recheck the radiator and overflow bottle after cooling |
Kubota Z125S Coolant Capacity FAQ
What is the cooling system capacity of the Kubota Z125S?
The Kubota Z125S cooling system capacity is shown as 0.63 gal (2.4 L). That is the number to use before draining the system.
What coolant type should I use in the Kubota Z125S?
Use ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible. The blunt rule is simple: match the manual’s coolant spec and do not mix unknown coolant formulas.
Should I use straight water in the Kubota Z125S?
Not for normal long-term use. The Kubota Z125S should use 50/50 coolant and water mix or the manual’s specified coolant mix so the system gets corrosion, freeze and boil protection.
Does old coolant matter in the Kubota Z125S?
Yes. Old coolant can lose protection even if temperature looks normal. The listed service interval for the Kubota Z125S is the service interval in the operator manual.
What engine specs affect Kubota Z125S coolant capacity?
The captured engine context is horsepower 25 hp (18.6 kW) and displacement 1.9 L (115.9 cu in). Engine size is one reason coolant capacity changes between tractors.
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
