The Kubota T1880 coolant capacity is listed as 2.2 gal (8.3 L). It also lists coolant type ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible and antifreeze mix 50/50 coolant and water mix.
Kubota T1880 Coolant Capacity
| Coolant capacity | 2.2 gal (8.3 L) |
|---|---|
| Coolant type | ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible |
| Antifreeze mix | 50/50 coolant and water mix |
| Engine horsepower | 18 hp (13.4 kW) |
| Engine displacement | 0.6 L (36.4 cu in) |
Coolant Capacity Comparison Chart
Coolant capacity comparison
Engine horsepower comparison
Engine displacement comparison
Kubota T1880 Coolant and Engine Notes
| Coolant capacity note | The headline cooling-system number for the Kubota T1880 is 2.2 gal (8.3 L). Buy enough coolant before opening the drain plug |
|---|---|
| Coolant type note | For the Kubota T1880, coolant type matters as much as capacity. The clean captured value is ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible |
| Antifreeze mix note | For the Kubota T1880, the captured mix is 50/50 coolant and water mix. Straight water is not the right long-term answer unless you are only flushing the system |
| Engine context note | Engine context for the Kubota T1880: engine horsepower 18 hp (13.4 kW) and displacement 0.6 L (36.4 cu in). Engine size helps explain why coolant capacity changes between models |
| Refill note | The practical service move for the Kubota T1880: buy enough coolant for 2.2 gal (8.3 L), fill to spec, run the engine, then recheck the radiator and overflow bottle after cooling |
Kubota T1880 Coolant Capacity FAQ
What is the Kubota T1880 coolant capacity?
The Kubota T1880 coolant capacity is listed as 2.2 gal (8.3 L) for coolant capacity. Use this as the refill planning number and confirm the final level at the radiator or overflow bottle.
Can I use any coolant in the Kubota T1880?
No. Use ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible or a coolant that clearly matches the manual’s required spec. Wrong coolant can create corrosion, deposits or seal problems.
Is premixed coolant okay for the Kubota T1880?
Premixed coolant can be fine if it matches ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible and the required mix. The captured mix for the Kubota T1880 is 50/50 coolant and water mix.
How often should I change coolant in the Kubota T1880?
The captured coolant change interval for the Kubota T1880 is the service interval in the operator manual. If service history is unknown, changing it is usually smarter than guessing.
What engine specs affect Kubota T1880 coolant capacity?
The captured engine context is horsepower 18 hp (13.4 kW) and displacement 0.6 L (36.4 cu in). Engine size is one reason coolant capacity changes between tractors.
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
