The Kubota T1760 deck belt part number found is K5112-71420. The deck belt width found is 0.5 in (13 mm). The drive belt size found is 98 in (2,489 mm) long by 0.62 in (16 mm) wide.
Deck belt part #K5112-71420
Deck belt sizewidth 0.5 in (13 mm)
Drive belt sizelength 98 in (2,489 mm) and width 0.62 in (16 mm)
Kubota T1760 Belt Size and Part Numbers
Mower deck belt part number
K5112-71420
Mower deck belt width
0.5 in (13 mm)
Drive belt length
98 in (2,489 mm)
Drive belt width
0.62 in (16 mm)
Belt Size Comparison Chart
Belt length comparison
This model
98 in
Average
110 in
Low
75 in
High
155 in
Belt width comparison
This model
0.5 in
Average
0.5 in
Low
0.38 in
High
0.75 in
Kubota T1760 Belt Notes
Mower deck belt note
The Kubota T1760 deck belt listing shows part number K5112-71420 with width 0.5 in (13 mm). Use the listed value as a buying guide, not a blind substitute for the deck-specific parts diagram
Drive belt note
The Kubota T1760 drive or transmission belt measurement captured here is length 98 in (2,489 mm) and width 0.62 in (16 mm). This is separate from the mower deck belt
Fitment note
Belts are cheap until you buy the wrong one twice. On the Kubota T1760, confirm belt route, old belt label and OEM part number before ordering
Kubota T1760 Belt Size FAQ
What should you check when fitting a 98 in (2,489 mm) drive belt on the Kubota T1760?
The drive belt length found is 98 in (2,489 mm). This is a longer mower belt run, so twist, idler alignment and the belt keeper positions matter. A belt can be the right length and still fail if it is routed wrong. Also check the idler spring and pulley grooves because drive belts can slip under load even when they look fine at idle
Can you replace the Kubota T1760 belt with the same length but different width?
The deck belt width found is 0.5 in (13 mm). That is the common 1/2-inch belt width range. Still match the OEM number because the belt angle, fabric wrap and effective length can differ. A belt with the wrong top width can ride too high or too low in the pulley even if the length looks right
What should you double-check with the Kubota T1760 deck belt part number?
The captured deck belt number is K5112-71420. Because the length is missing here, check the old belt label, deck tag or parts diagram before trusting a non-OEM cross-reference
Official information note
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official kubotausa.com before ordering a replacement belt.
