The Kubota MX5000 coolant capacity is listed as 2.17 gal (8.2 L). It also lists coolant type ethylene glycol-based coolant and Kubota Genuine Coolant and antifreeze mix 50/50 coolant and water mix.
Coolant capacity2.17 gal (8.2 L)
Coolant typeethylene glycol-based coolant and Kubota Genuine Coolant
Antifreeze mix50/50 coolant and water mix
Kubota MX5000 Coolant Capacity
Cooling system capacity
2.17 gal (8.2 L)
Coolant type
ethylene glycol-based coolant and Kubota Genuine Coolant
Antifreeze mix
50/50 coolant and water mix
Engine horsepower
52.2 hp (38.9 kW)
Engine displacement
2.4 L (148.5 cu in)
Coolant Capacity Comparison Chart
Coolant capacity comparison
This model
2.17 gal
Average
2 gal
Low
1 gal
High
4 gal
Engine horsepower comparison
This model
52 hp
Average
75 hp
Low
40 hp
High
125 hp
Engine displacement comparison
This model
2.4 L
Average
1.7 L
Low
0.9 L
High
3 L
Kubota MX5000 Coolant and Engine Notes
Coolant capacity note
For service planning, the Kubota MX5000 should be treated as 2.17 gal (8.2 L) coolant capacity. That is a compact tractor cooling system where a normal premixed coolant jug may cover most of the refill
Coolant type note
Use the right coolant formula for the Kubota MX5000: ethylene glycol-based coolant and Kubota Genuine Coolant. Cheap wrong coolant is not a smart saving if it causes corrosion or deposits
Antifreeze mix note
For the Kubota MX5000, the captured mix is 50/50 coolant and water mix. Straight water is not the right long-term answer unless you are only flushing the system
Engine context note
Engine context for the Kubota MX5000: engine horsepower 52.2 hp (38.9 kW) and displacement 2.4 L (148.5 cu in). Engine size helps explain why coolant capacity changes between models
Refill note
Coolant changes are simple but easy to do sloppily. On the Kubota MX5000, plan around 2.17 gal (8.2 L) and confirm the final level after air works out of the system
Kubota MX5000 Coolant Capacity FAQ
What is the cooling system capacity of the Kubota MX5000?
The Kubota MX5000 cooling system capacity is shown as 2.17 gal (8.2 L). That is the number to use before draining the system.
What coolant type should I use in the Kubota MX5000?
Use ethylene glycol-based coolant and Kubota Genuine Coolant. The blunt rule is simple: match the manual’s coolant spec and do not mix unknown coolant formulas.
Should I use straight water in the Kubota MX5000?
Not for normal long-term use. The Kubota MX5000 should use 50/50 coolant and water mix or the manual’s specified coolant mix so the system gets corrosion, freeze and boil protection.
Does old coolant matter in the Kubota MX5000?
Yes. Old coolant can lose protection even if temperature looks normal. The listed service interval for the Kubota MX5000 is the service interval in the operator manual.
Why does the Kubota MX5000 coolant amount differ from other models?
Coolant capacity changes with engine and radiator setup. For the Kubota MX5000, the supporting engine data is horsepower 52.2 hp (38.9 kW) and displacement 2.4 L (148.5 cu in).
Official information note
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
