The Kubota L240 coolant capacity is listed as 2.17 gal (8.2 L). It also lists coolant type ethylene glycol-based coolant and ASTM D3306 compatible and antifreeze mix 50/50 coolant and distilled water mix.
Kubota L240 Coolant Capacity
| Cooling system capacity | 2.17 gal (8.2 L) |
|---|---|
| Coolant type | ethylene glycol-based coolant and ASTM D3306 compatible |
| Antifreeze mix | 50/50 coolant and distilled water mix |
| Engine horsepower | 23.7 hp (17.7 kW) |
| Engine displacement | 1.3 L (79.3 cu in) |
Coolant Capacity Comparison Chart
Coolant capacity comparison
Engine horsepower comparison
Engine displacement comparison
Kubota L240 Coolant and Engine Notes
| Coolant capacity note | The Kubota L240’s key coolant figure here is 2.17 gal (8.2 L) for cooling system capacity. Use that before buying coolant or draining the system |
|---|---|
| Coolant type note | Use the right coolant formula for the Kubota L240: ethylene glycol-based coolant and ASTM D3306 compatible. Cheap wrong coolant is not a smart saving if it causes corrosion or deposits |
| Antifreeze mix note | The Kubota L240 antifreeze mix is listed as 50/50 coolant and distilled water mix. That is the normal protection range for freezing, boiling and corrosion control |
| Engine context note | For the Kubota L240, the supporting engine specs are engine horsepower 23.7 hp (17.7 kW) and displacement 1.3 L (79.3 cu in). Use them as context beside the coolant capacity, not as a replacement for the manual |
| Refill note | Coolant changes are simple but easy to do sloppily. On the Kubota L240, plan around 2.17 gal (8.2 L) and confirm the final level after air works out of the system |
Kubota L240 Coolant Capacity FAQ
What is the Kubota L240 coolant capacity?
The Kubota L240 coolant capacity is listed as 2.17 gal (8.2 L) for cooling system capacity. Use this as the refill planning number and confirm the final level at the radiator or overflow bottle.
Can I use any coolant in the Kubota L240?
No. Use ethylene glycol-based coolant and ASTM D3306 compatible or a coolant that clearly matches the manual’s required spec. Wrong coolant can create corrosion, deposits or seal problems.
Is premixed coolant okay for the Kubota L240?
Premixed coolant can be fine if it matches ethylene glycol-based coolant and ASTM D3306 compatible and the required mix. The captured mix for the Kubota L240 is 50/50 coolant and distilled water mix.
How often should I change coolant in the Kubota L240?
The captured coolant change interval for the Kubota L240 is the service interval in the operator manual. If service history is unknown, changing it is usually smarter than guessing.
Why does the Kubota L240 coolant amount differ from other models?
Coolant capacity changes with engine and radiator setup. For the Kubota L240, the supporting engine data is horsepower 23.7 hp (17.7 kW) and displacement 1.3 L (79.3 cu in).
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
