Kubota L2201 Coolant Capacity

Quick answer:

The Kubota L2201 coolant capacity is listed as 1.59 gal (6 L). It also lists coolant type ethylene glycol-based coolant and Kubota Genuine Coolant and antifreeze mix 50/50 coolant and distilled water mix.

Coolant capacity1.59 gal (6 L)
Coolant typeethylene glycol-based coolant and Kubota Genuine Coolant
Antifreeze mix50/50 coolant and distilled water mix

Kubota L2201 Coolant Capacity

Coolant capacity 1.59 gal (6 L)
Cooling system capacity 1.59 gal (6 L)
Radiator capacity 1.59 gal (6 L)
Coolant type ethylene glycol-based coolant and Kubota Genuine Coolant
Antifreeze mix 50/50 coolant and distilled water mix
Engine horsepower 21.7 hp (16.2 kW)
Engine displacement 1.1 L (67.1 cu in)

Coolant Capacity Comparison Chart

Coolant capacity comparison

This model

1.59 gal

Average

2 gal

Low

1 gal

High

4 gal

Engine horsepower comparison

This model

22 hp

Average

18 hp

Low

10 hp

High

30 hp

Engine displacement comparison

This model

1.1 L

Average

0.9 L

Low

0.5 L

High

1.5 L

Kubota L2201 Coolant and Engine Notes

Coolant capacity note The headline cooling-system number for the Kubota L2201 is 1.59 gal (6 L). Buy enough coolant before opening the drain plug
Radiator capacity note Radiator capacity is listed as 1.59 gal (6 L). The full cooling system can be higher because coolant also sits in the engine and hoses
Coolant type note For the Kubota L2201, coolant type matters as much as capacity. The clean captured value is ethylene glycol-based coolant and Kubota Genuine Coolant
Antifreeze mix note The 50/50 coolant and distilled water mix mix gives the Kubota L2201 coolant system a sensible balance of freeze protection, boil protection and corrosion protection
Engine context note The Kubota L2201 engine data captured here is engine horsepower 21.7 hp (16.2 kW) and displacement 1.1 L (67.1 cu in). Bigger engines usually need more coolant and more careful refill bleeding
Refill note The practical service move for the Kubota L2201: buy enough coolant for 1.59 gal (6 L), fill to spec, run the engine, then recheck the radiator and overflow bottle after cooling

Kubota L2201 Coolant Capacity FAQ

What is the Kubota L2201 coolant capacity?

The Kubota L2201 coolant capacity is listed as 1.59 gal (6 L) for coolant capacity. Use this as the refill planning number and confirm the final level at the radiator or overflow bottle.

Can I use any coolant in the Kubota L2201?

No. Use ethylene glycol-based coolant and Kubota Genuine Coolant or a coolant that clearly matches the manual’s required spec. Wrong coolant can create corrosion, deposits or seal problems.

Is premixed coolant okay for the Kubota L2201?

Premixed coolant can be fine if it matches ethylene glycol-based coolant and Kubota Genuine Coolant and the required mix. The captured mix for the Kubota L2201 is 50/50 coolant and distilled water mix.

How often should I change coolant in the Kubota L2201?

The captured coolant change interval for the Kubota L2201 is the service interval in the operator manual. If service history is unknown, changing it is usually smarter than guessing.

Why does the Kubota L2201 coolant amount differ from other models?

Coolant capacity changes with engine and radiator setup. For the Kubota L2201, the supporting engine data is horsepower 21.7 hp (16.2 kW) and displacement 1.1 L (67.1 cu in).

Official information note

Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.