The Kubota L1-235 coolant capacity is listed as 1.59 gal (6 L). It also lists coolant type ethylene glycol-based coolant and ASTM D3306 compatible and antifreeze mix 50/50 coolant and distilled water mix.
Kubota L1-235 Coolant Capacity
| Coolant capacity | 1.59 gal (6 L) |
|---|---|
| Coolant type | ethylene glycol-based coolant and ASTM D3306 compatible |
| Antifreeze mix | 50/50 coolant and distilled water mix |
| Engine displacement | 1.5 L (91.5 cu in) |
Coolant Capacity Comparison Chart
Coolant capacity comparison
Engine displacement comparison
Kubota L1-235 Coolant and Engine Notes
| Coolant capacity note | The Kubota L1-235 coolant spec points to 1.59 gal (6 L). Do not rely on the radiator-only amount if the full cooling-system capacity is available |
|---|---|
| Coolant type note | The captured coolant type for the Kubota L1-235 is ethylene glycol-based coolant and ASTM D3306 compatible. Do not mix unknown coolant types unless the label and manual say they are compatible |
| Antifreeze mix note | The 50/50 coolant and distilled water mix mix gives the Kubota L1-235 coolant system a sensible balance of freeze protection, boil protection and corrosion protection |
| Engine context note | The Kubota L1-235 engine data captured here is displacement 1.5 L (91.5 cu in). Bigger engines usually need more coolant and more careful refill bleeding |
| Refill note | For a coolant change on the Kubota L1-235, do not just dump in coolant and walk away. Fill slowly, run it up to temperature, cool it down and top up as needed |
Kubota L1-235 Coolant Capacity FAQ
What is the cooling system capacity of the Kubota L1-235?
The Kubota L1-235 cooling system capacity is shown as 1.59 gal (6 L). That is the number to use before draining the system.
What coolant type should I use in the Kubota L1-235?
Use ethylene glycol-based coolant and ASTM D3306 compatible. The blunt rule is simple: match the manual’s coolant spec and do not mix unknown coolant formulas.
Should I use straight water in the Kubota L1-235?
Not for normal long-term use. The Kubota L1-235 should use 50/50 coolant and distilled water mix or the manual’s specified coolant mix so the system gets corrosion, freeze and boil protection.
Does old coolant matter in the Kubota L1-235?
Yes. Old coolant can lose protection even if temperature looks normal. The listed service interval for the Kubota L1-235 is the service interval in the operator manual.
What engine specs affect Kubota L1-235 coolant capacity?
The captured engine context is displacement 1.5 L (91.5 cu in). Engine size is one reason coolant capacity changes between tractors.
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
