The Kubota G4200 mower blade part number found is 76500-34330. The blade set part number found is 76500-34330. The blade measurement captured is width 3 in (76 mm). The deck uses 3 blades. The captured deck size is 48 in deck.
Blade part #76500-34330
Blade set part #76500-34330
Blade sizewidth 3 in (76 mm)
Blade count3 blades
Deck size48 in deck
Kubota G4200 Mower Blade Size and Part Numbers
Mower blade part number
76500-34330
Mower blade set part number
76500-34330
Blade width
3 in (76 mm)
Number of blades
3 blades
Deck size
48 in deck
Blade type
high-lift, mulching, and 3-in-1
Blade Size Comparison Chart
Blade width comparison
This model
3 in
Average
2.5 in
Low
2 in
High
3.5 in
Mower deck size comparison
This model
48 in
Average
48 in
Low
38 in
High
60 in
Kubota G4200 Blade Notes
Blade note
The Kubota G4200 blade listing captured here shows single blade part number 76500-34330, blade set part number 76500-34330, and width 3 in (76 mm). Do not buy purely from model name if the mower deck or serial range is different
Deck note
For the Kubota G4200, the captured deck information is deck size 48 in deck and blade count 3 blades. Deck size matters because the same model family can use different blade kits
Blade type note
For the Kubota G4200, blade type is listed as high-lift, mulching, and 3-in-1. Pick the blade style for the job: clean discharge, bagging lift, or mulching
Fitment note
Before ordering Kubota G4200 blades, compare the old blade stamp, center-hole shape, blade length and deck size. Close-looking blades can still be wrong
Kubota G4200 Mower Blade FAQ
Should you buy Kubota G4200 blades by length only?
No. The blade width found is 3 in (76 mm). That is a normal mower blade width range. Width affects airflow, lift and clipping movement under the deck. Use length, width, center hole and OEM part number together where possible
How do you avoid buying the wrong Kubota G4200 blade kit?
Start with the captured deck setup: 48 in deck and 3 blades. Then confirm the blade part number against the deck tag, old blade stamp or parts diagram
Can you swap Kubota G4200 blade types?
The blade type captured is high-lift, mulching, and 3-in-1. You can often choose a different style only if it fits the same deck and spindle setup. Use 48 in deck as the fitment starting point
Official information note
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official kubotausa.com before ordering replacement blades.
